Is my '11 FLTRX wired for Auto comp releases?
#1
#2
#4
#5
Join Date: Jan 2011
Location: Western Illinois, land of bad roads, and corrupt politicians
Posts: 2,590
Likes: 0
Received 30 Likes
on
20 Posts
You may also, (or may not), have to turn them on in the ECU. When I looked at my 96" readout, they were set to off. Makes sense, since I don't have them.
It's in the Limits&Switches section of the ECU and listed as Active Compression Release
It's in the Limits&Switches section of the ECU and listed as Active Compression Release
Last edited by shooter5074; 10-04-2012 at 10:16 AM.
#6
#7
Join Date: Jan 2011
Location: Western Illinois, land of bad roads, and corrupt politicians
Posts: 2,590
Likes: 0
Received 30 Likes
on
20 Posts
Trending Topics
#8
plug and play ya right i wish
nothing harley does is simple u have to pull fuse box off pull 2 wire off for fuel pump cicuit more them to the next row over insert 2 new wires from acrs where u pulled pump wires out thenpull plug off emc moduelband add wire to terminal 19 this purple wire completes the ground for acr when starter is pushed be carefull pulling pins out of terminal box
Thread
Thread Starter
Forum
Replies
Last Post