Softail Models Standard, Custom, Night Train, Deuce, Springer, Heritage, Fatboy, Deluxe, Rocker and Cross Bones.
Sponsored by:
Sponsored by:

How to remove / install new handlebar?

  #1  
Old 03-17-2013, 04:09 AM
sietse's Avatar
sietse
sietse is offline
Novice
Thread Starter
Join Date: Aug 2011
Location: the Netherlands
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default How to remove / install new handlebar?

Hi there,

I am, together with the owner of a 2005 softail, working on his bike.
We want to install another handlebar.
Anyone who can give us tips and / or tricks?
What to remove?
Where to cut the handlebar wires?

Any help is appreciated!

Thanks in advance.

Kind regards,


Sietse
 
  #2  
Old 03-17-2013, 07:00 AM
patharley's Avatar
patharley
patharley is offline
Tourer
Join Date: Jun 2009
Location: Montreal (Quebec)
Posts: 400
Likes: 0
Received 2 Likes on 2 Posts
Default

Ape, beach bar, ... ??
Do you want the wire in the handlebar, if yes, you have to remove the gas tanks and disconnect the wire from the plug.
 
  #3  
Old 03-17-2013, 07:12 AM
Low budget Dan's Avatar
Low budget Dan
Low budget Dan is offline
Road Master

Join Date: Dec 2012
Location: Getzville New York
Posts: 1,185
Received 460 Likes on 232 Posts
Default

whatever you do dont cut any wires get a service manual and see where all the conectors are if you are using HD bars you can use the chart in the parts catlouge to determine if you need new cables etc. if you are going to run the wires internally you will have to find the conectors and take them apart to chase them thru the bars take your time and good luck
 
  #4  
Old 03-17-2013, 09:50 AM
Hogpro's Avatar
Hogpro
Hogpro is offline
Former Sponsor
Join Date: Aug 2005
Posts: 10,968
Likes: 0
Received 45 Likes on 43 Posts
Default

This might help although the 2005 has Deustch connectors, not the amp connectors shown here.
https://www.hdforums.com/forum/dyna-...e-install.html
 
  #5  
Old 03-17-2013, 10:27 AM
sietse's Avatar
sietse
sietse is offline
Novice
Thread Starter
Join Date: Aug 2011
Location: the Netherlands
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default

For so long, thanks a lot Patharley, Low budget Dan and Hogpro.
This will help us a lot.
And more info is more than welcome. The more I get to know, the easier the job will be.

Regards,

Sietse
 
  #6  
Old 03-17-2013, 10:40 AM
jam436's Avatar
jam436
jam436 is offline
Supporter
Join Date: Jun 2012
Location: Pittsburgh, PA
Posts: 2,912
Received 72 Likes on 53 Posts
Default

You can download the 2013 H-D Parts and Accessories catalog here, in digital PDF format.:

2013 Genuine H-D Motor Parts and Accessories Catalog

Handlebars start on page 572 in the "Controls" section, and in the Appendix starting on page 822, there is a listing of their installation requirements, regarding which control cables may or may not need to be changed out - depending on which bars you choose.

..just to give you some ideas...


..and one tip, anytime you're working on your bars, cover your tank with a heavy blanket, because once you loosen that last riser clamp bolt, they're gonna fall. - easier done with two people...
 

Last edited by jam436; 03-17-2013 at 10:47 AM.
  #7  
Old 03-17-2013, 11:15 AM
dazc76's Avatar
dazc76
dazc76 is offline
Cruiser
Join Date: Dec 2010
Location: Monterey, CA.
Posts: 144
Likes: 0
Received 0 Likes on 0 Posts
Default

If you are running the wiring through the bars, you'll have to remove the wire from the connectors, don't waste your money on any tools (like I did), use a paper clip to push the wires out. Just don't forget which one goes where, lol.
 
  #8  
Old 03-18-2013, 10:59 AM
sietse's Avatar
sietse
sietse is offline
Novice
Thread Starter
Join Date: Aug 2011
Location: the Netherlands
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks a lot too jam436 and dazc76. These tips will also help us a lot.

Kind regards,

Sietse
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jose calderon
Electrical/Lighting/Alarm
3
06-01-2016 05:46 PM
DynaGuy77
Dyna Glide Models
18
03-09-2012 10:54 PM
Crash Davis
Dyna Glide Models
10
02-08-2010 12:30 AM
rubiconMike
Softail Models
19
08-29-2008 07:44 PM
SMacDunk
Touring Models
12
08-12-2007 11:35 AM


Thread Tools
Search this Thread
Quick Reply: How to remove / install new handlebar?



All times are GMT -5. The time now is 05:49 PM.