Buddy of mine just picked up his 2006 Road Glide. He is tearing it down to custom paint and asked me if I could find the procedure for removing the ignition lock cylinder on the Road Glides.

Anyone have this information?

 

i dont have the answer but i bet if you pm tc he will have the answer he knows everything...hehehe...good luck

 

Not absolutely sure on this , but try inserting the key and turn it LEFT fully I think, it opens up a small hole that you depress a tab in it and it releases the cylinder. I'm winging it , but it may work

 

I will pass the information on to him. Thanks.

 

Ted,

I have a copy of the directions for removal on EG models. Not sure if RG ignition is the same or not. Can post if you still haven't figured it out.


FLRYDR

 

Sure. I would appreciate it.

 

i could tell ya....but then id have to kill ya!!

 

Tell your buddy the best money he will ever spend on his RG is a service manual!!

1. Insert key into switch
2. Turn fully to right (acc)
3. Depress button under switch ****
4. Key will turn further to right.
5. Remove key and switch .

Hope this helps

 

the button he is refering too is a very small almost peice of wire that sticks down, if you use something like a hook dental pick or maybe a very small screwdriver to push it it will be easier. I think i might have used the truck keys to do it with last time but i forget?