How to set the clock?
#3
RE: How to set the clock?
[ul][*]Turn Ignition to ACC or IGNITION.[*]Press and hold the function switch on side for 5 seconds or until 12 HR begins to flash.[*]Press and release function switch once to advance to a blinking 24 HR. Each time you press switch, it will change between 12 HR and 24 HR clock. Once you have it set on the desired time, press and hold function switch for 5 seconds. The display should change to the time display with the hours blinking.[*]Press and release function switch repeatedly to advance the hours. When correct hour is displayed, press and hold function switch for 5 seconds. The display should change to the minutes blinking.[*]Press and release function switch repeatedly to advance the minutes. When correct time is displayed, press and hold function switch for 5 seconds. The minutes display will stop blinking and your clock will be set.[/ul]
#4
#6
#7
??
Will this work on an FXDB 09 street bob?
[ul][*]Turn Ignition to ACC or IGNITION.[*]Press and hold the function switch on side for 5 seconds or until 12 HR begins to flash.[*]Press and release function switch once to advance to a blinking 24 HR. Each time you press switch, it will change between 12 HR and 24 HR clock. Once you have it set on the desired time, press and hold function switch for 5 seconds. The display should change to the time display with the hours blinking.[*]Press and release function switch repeatedly to advance the hours. When correct hour is displayed, press and hold function switch for 5 seconds. The display should change to the minutes blinking.[*]Press and release function switch repeatedly to advance the minutes. When correct time is displayed, press and hold function switch for 5 seconds. The minutes display will stop blinking and your clock will be set.[/ul]
The following users liked this post:
johnanderson (05-08-2020)
Trending Topics
#8
The following users liked this post:
johnanderson (05-08-2020)
#10
From the catalog (pg. 627)...:
"..Combination Speedometer/Tachometer
Maintain the clean view over the handlebar. This unique
Combination Speedometer/Tachometer allows you to monitor
engine speed without adding additional handlebarmounted
gauges. The unit mounts in the stock dash opening
and is a direct plug-in installation. The backlit gauges include
a large LCD (liquid crystal display) information screen that
displays odometer/tripmeter data, miles-to-empty readings,
an easy-to-read segmented fuel display, a gear position indicator
and clock..."