Tank Bra install
#1
#3
RE: Tank Bra install
Well I hope I’m telling you right. This is how I installed mine, IAW the instructions wash and wax the tank. Take the elastic band, and bring it forward over the Speedo and the dash rubber cover at the front of the tank. Now work it under the tank by the xover. Now where the band stops, remember that. Now use those friction sticks, put it right there. Because the wind my have that band moving. Now last is to take the single strap and bring it under the frame by the heads and hook it to that single loop.
I hope this helps
I hope this helps
#4
RE: Tank Bra install
just do a 3m paint protection film, you don't change the look or color and the tank piece may only be $40.00 or less.look up a dealer thru www.xpel.com or go to 3m.com and look up paint protection.
#5
#6
Join Date: Feb 2005
Location: Twin Cities Minnesota
Posts: 3,985
Received 6,812 Likes
on
1,087 Posts
#7
RE: Tank Bra install
ORIGINAL: joe
just do a 3m paint protection film, you don't change the look or color and the tank piece may only be $40.00 or less.look up a dealer thru www.xpel.com or go to 3m.com and look up paint protection.
just do a 3m paint protection film, you don't change the look or color and the tank piece may only be $40.00 or less.look up a dealer thru www.xpel.com or go to 3m.com and look up paint protection.
Dirt will get under it and scratch the finish.
Joe's suggestion about the 3M film is a better alternative.
Also.... try: http://www.snidersproducts.com and check out their cling film. I have used it for quite a while, and it's a great product.
Thread
Thread Starter
Forum
Replies
Last Post
Can't Wait 2 Ride
Exhaust System Topics
0
06-22-2012 10:00 AM