STORZ CERIANI 55mm INVERTED FORK
#1
#2
#3
#4
INVERTED FORK - cang og wrong
I went with a inverted front end. The ride is unbelievable, just like riding across a frozen pond without the slippery! The first time I rode the FXR, I kept looking back to see if the holes were filled over a road I ride on many times a week for years. I took a different approach than Stortz, I use 25 mm cartridge(inner) type and build the forks to fit (rider/gear/bike weight) and replace the: valve, shim stack, fork cap and spring for Each fork. No matter which way you go it is a vast improvement over anything Harley. I would get the bike to handle properly than think about chrome. Thanks, Howard, motorcyclemetal.com
[IMG]local://upfiles/29413/37D443A7416248418E8FAFAE6F337112.jpg[/IMG]
[IMG]local://upfiles/29413/37D443A7416248418E8FAFAE6F337112.jpg[/IMG]
#5
#6
New photos
I will get some tomorrow. worked on it all day from 9-5pm. I am doing R&R with new rear shocks with Penski. Brand new stuff & far superior than ANYTHING out there for sale. Front forks suspension works great! Smoooooth to say the least. New motor so I am heat cycling & maybe an oil change tomorrow. I measured the bike and aligned it. Makes a big difference as most bikes are not adjusted properly. Will post photos if U like Howard, motorcyclemetal.com
Thread
Thread Starter
Forum
Replies
Last Post
01Sled107
Frame/Suspension/Front End/Brakes
3
02-28-2018 10:49 PM