Anyone know what the handlebar diameter is on my '03 883? I will in all probability be changing them out in the spring and want to make sure I order the correct diameter. Tks.

Tom

 

I think they're one inch but I've been waiting to see somone answer this myself.

 

IRON: They are 1 inch diameter, unless someone before you swapped them out to the larger size. ........ BC

 

stock is 1 inch if they are original.

 

Yep, they are original. Apprecite the feedback......Thanks all.

Tom

 

Yep B C they are stock from the factory, never changed, so now that I have confirmation from a couple of you guys as to their 1" dia. all I gotta do now is look around for a suitable set of pullbacks'. Tks.

Tom

 

Somebody correct me if I'm wrong but aren't metric bikes bars 7/8" generally and HDs are 1".

I noticed the bars on my Sportster also have indentations for the cables to enter the switch housings that you won't find on a run-of-the-mill round bar.

 

Some metrics may have 7/8" bars, I don't know for sure, but the bars on the '99 V* 650 I had B4 changing to the sporty were stock 1".

Tom

 

is that true for 07's as well? I wanna change the bars on mine, but wasn't sure of the diameter..

 

Is 2014 road king 1 inch also? I have 10 inch apes... I'd like to be a few inches higher & little more pullback.. Can I get the bars higher & more pullback by using pullback risers?? I've seen some around 4-5 inches with what looks like about 45 degree on the risers?? I'm trying to do this without new bars & lots of labor cost!!