I shot out an email to
www.nightrider.com and asked what SE cams would he use. Keep in mind the dealer is letting put a bigger set of cams then the SE255 cams that come with the SE103 kit. Here is what he suggested.
I like the SE-251 cam. Greatly under-rated by most HD Dealers, this is a very solid performing cam that does have the potential for a broad flat torque curve and somestrong HP in the upper range. This is also a cam that is ideally suited for the mild 9.5:1 compression ratios that should be run on FLH based bikes to prevent detonation and serious overheating above/beyond the normal high temps HD engines experience. Do not confuse mild compression with low power. Good aftermarket shops can get 110-115HP from 95/96/103 engines with this lower compression.[/align]