anyone running the tman 625 cams. i know they originally were for softails, etc, but bought a set based on recommendations to go in a 113". anyone with experience on larger motors with this cam?
riding 2000-4000 rpm with single rider. not looking for high rpm hp but good streetability and starting with no detonation problems in really hot summer weather over 100 many days. going in fxdwg with 45 mikuni carb. have been advised they will perform well at 10.25 -10.50 compression ratio in this size motor and have great torque at this rpm range. will have programmable ignition module.

any experience?

 

I have no experiance with them, and I hate to see a question like this go unanswered, so Ill give you my 2 cents.

I thinkits a good grind, I went to the sight to see the specs, It should work fine for what your doing.

you will need to just be mindful of valve to piston clearance.