Rear turn signal relocation
#1
Rear turn signal relocation
Ok folks, I need some advice/help. Have an '07 SuperGlide Custom with the detachable backrest and a laydown license plate frame. When doing overnight trips, I have a bag that I use to sit on the rear luggage carrier portion of the backrest. However, that sometimes isn't enough. I have purchased a set of over the fender leather saddlebags for those rare occasions where I need additional storage. I was fully aware at the time I bought them that I would need to relocate the rear turn signals. Unfortunately, I haven't been able to find any product that does this for the SuperGlide Customs. I am coming down to deciding to relocate them myself by drilling through the fender near the bottom, but this isn't my preferred method. I'd like to find an aftermarket bracket that I could either incorporate into the existing laydown license plate assembly or into the rear brake light or similar.
Anyone know of any products like this or have an innovative solution they came up with to relocate their turn signals back near the plate frame or rear brake light?
Anyone know of any products like this or have an innovative solution they came up with to relocate their turn signals back near the plate frame or rear brake light?
#2
Join Date: Jul 2005
Location: Lockport Township, IL
Posts: 3,968
Likes: 0
Received 34 Likes
on
16 Posts
RE: Rear turn signal relocation
68732-02A is the turn signal relocation kit for 02 and later DYNA models except FXDWG and FXDF. According to the HD parts catalog, it does nt fit with the laydown licens plate, but you may want to check on that. I have heard of it being used with the laydown plate.
#3
RE: Rear turn signal relocation
I used a kit from Custom Chrome (purchased from Great Bike Gear.com)to relocate the signals on my 07 Street Bob. Pretty sure they had kits for all Dynas. It came with a bracket that mounted to their lay down license plate bracket. Not sure if it wiil work with other lay down plate frames. You use your stock turn signals including the wing standoff.
#4
RE: Rear turn signal relocation
ORIGINAL: rh8234
68732-02A is the turn signal relocation kit for 02 and later DYNA models except FXDWG and FXDF. According to the HD parts catalog, it does nt fit with the laydown licens plate, but you may want to check on that. I have heard of it being used with the laydown plate.
68732-02A is the turn signal relocation kit for 02 and later DYNA models except FXDWG and FXDF. According to the HD parts catalog, it does nt fit with the laydown licens plate, but you may want to check on that. I have heard of it being used with the laydown plate.
#5
#6
RE: Rear turn signal relocation
i have a 01 super glide sport.the turn indicators go through the back of the license plate.harley does offer a laydown setup.jus go to harley web sight then look for laydown license plate on 01 super glide sport FXDX....its 79 or 89 bucks....maybe the mod would be cleaner....
Thread
Thread Starter
Forum
Replies
Last Post
dmftoy1
Dyna Glide Models
16
09-19-2009 04:39 AM