08 Nightster turn signal relocation
#1
#2
Don't get the HD ones, they stick out a mile. I got the ones in the center at the bottom of the page part number 09148 for 39mm forks (I think the N is the same size as my R). These work great and don't hit pedestrians on the sidewalk as you go by.
http://www.customchrome.com/catalogs...l.asp?page=281
http://www.customchrome.com/catalogs...l.asp?page=281
#3
Here's a link to a thread I posted when I relocated my signals and put on my bars. You will see pics of them on the bike. I got the drag specialties turn signal mounts from J&P Cycle. cost $20 and I had them powdercoated black. They are the same concept as the HD ones, but don't stick out so much. Hope this helps.
https://www.hdforums.com/forum/sportster-models/285637-roland-sands-short-stacks-on-nightster-pics.html
https://www.hdforums.com/forum/sportster-models/285637-roland-sands-short-stacks-on-nightster-pics.html
#4
Here's a link to a thread I posted when I relocated my signals and put on my bars. You will see pics of them on the bike. I got the drag specialties turn signal mounts from J&P Cycle. cost $20 and I had them powdercoated black. They are the same concept as the HD ones, but don't stick out so much. Hope this helps.
https://www.hdforums.com/forum/showthread.php?t=285637
https://www.hdforums.com/forum/showthread.php?t=285637
http://www.jpcycles.com/productgroup...F-B34C905E8A49
#5
#6
#7
Well If you have the 2008 Harley Davidson parts and accessories catalog (Bibble) it's on page 671, Multi Fit section under lighting. Pic - H Turn signal relocation kit 06 - later Dyna Models part # 68564-06. This is the exact item that the parts department picked for me at my local harley Davidson Dealership. (They all have this catalog) You have a really positive chance that it will be in stock, as I was told they are very popular, and the cost is $28.95.
You can also buy the clamps but it's just too much clutter.
You can also buy the clamps but it's just too much clutter.
Trending Topics
#9
Will these mounts work?
It looks like these mounts would work and probably need to powder coat them black.
Product # 3300270 at www.jpcycles.com
http://www.jpcycles.com/Search/Produ...il?sku=3300270
Product # 3300270 at www.jpcycles.com
http://www.jpcycles.com/Search/Produ...il?sku=3300270