Side Mount License Plate For Fat Bob
#1
Side Mount License Plate For Fat Bob
anyone found any good choices out there? I am finding them hard to come by for some reason. I found a universal one on JP Cycles but it mounts under the axle nut and I'd rather have something that attaches to the swingarm or otherwise.
Suggestions?
thanks
Suggestions?
thanks
#3
#6
I installed mine on the shock bolt but could put it on the belt guard or axle. Ordered the side plate off ebay for $22.00 and some Black LED tag bolts $16.00 (links below).
here are pics:
http://www.harleyalley.com/showphoto.php/photo/542
Black LED Tag Boltz
http://www.customdynamics.com/illumi...%20Tag%20Bolts
Side plate
http://stores.ebay.com/Road-6-Custom...QQftidZ2QQtZkm
here are pics:
http://www.harleyalley.com/showphoto.php/photo/542
Black LED Tag Boltz
http://www.customdynamics.com/illumi...%20Tag%20Bolts
Side plate
http://stores.ebay.com/Road-6-Custom...QQftidZ2QQtZkm
#7
Trending Topics
#8
I installed mine on the shock bolt but could put it on the belt guard or axle. Ordered the side plate off ebay for $22.00 and some Black LED tag bolts $16.00 (links below).
here are pics:
http://www.harleyalley.com/showphoto.php/photo/542
Black LED Tag Boltz
http://www.customdynamics.com/illumi...%20Tag%20Bolts
Side plate
http://stores.ebay.com/Road-6-Custom...QQftidZ2QQtZkm
here are pics:
http://www.harleyalley.com/showphoto.php/photo/542
Black LED Tag Boltz
http://www.customdynamics.com/illumi...%20Tag%20Bolts
Side plate
http://stores.ebay.com/Road-6-Custom...QQftidZ2QQtZkm
#10
See if these links work. For the license plate bracket link click on "License Plate Brackets" link on the left menu to see selection. I mounted the License plate bracket to the shock bolt. Then I shrink wrapped all 3 wires together into one and ran them behind the swing arm and up underneath the seat to connect them to juice. I used a couple cable ties to secure. One to the bottom of shock and the other behind the swing arm up towards front before it goes up under seat. Probably could have drilled a hole though the bracket instead of running wires underneath to make it cleaner which I might redo. Took a couple pics below. Hope this helps.
Black LED Tag Boltz:
http://www.customdynamics.com/custom...ct_listing.htm
License Plate Bracket:
http://stores.ebay.com/Road-6-Customs
Pics: