set avc on bikertronics radio
#1
set avc on bikertronics radio
okay,ive tried setting the avc according to the instructions,checked the wiring but still doesnt seem to work.i ride with the radio up kinda loud so i need to get this to work.does some of this have to be setup through the radio such as the volumn for each input device.im using the sony cdx gt3ui ,ithink,so i know is the right radio and everything else seems to work fine.any suggestions?
#2
#3
AVC is set through the head unit. If you're having troubles, call Biketronics and talk to their tech support guys. You can also send them emails on the weekend as they check them periodically knowing that most people install their stuff on the weekends. Not sure with the bowl being on today but you can try.
#4
this was posted by Harleypingman on another thread.... i'm sure the instructions are the same to enable it.
From Biketronics' instructions to diable the AVC: "Start by depressing the left audio switch to middle position (lm?) for about 2 seconds. Now release and wait four seconds - The AVC is now disabled . . ."
From Biketronics' instructions to diable the AVC: "Start by depressing the left audio switch to middle position (lm?) for about 2 seconds. Now release and wait four seconds - The AVC is now disabled . . ."
#5
#6
You have the instructions. If you still have problems, call Biketronics.
#7
Join Date: Jul 2006
Location: Rio Grande Valley-Texas
Posts: 4,813
Likes: 0
Received 5 Likes
on
5 Posts
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
HarDover
General Topics/Tech Tips
0
03-25-2009 04:47 AM