? on adjusting handlebars on a 06 Street Glide
#1
? on adjusting handlebars on a 06 Street Glide
Over winter I had some KW Ergo back bars put on my bike. I had them adjust the bars one time I was there. I would like to try to adjust them again myself. Where I have them the levers have to be angled upward. If I raise the bars a bit I will be able to bring the levers down. I took the fairing cap off according to the service manual. Then it said to loosen the two front screws to the bar clamps. The radio and everything else is in the way. Is there a better way to do this? Will I need to take the radio out?
I know someone will jump in and say to use the search as aways. Well, I had no luck.
thanks
Eric
I know someone will jump in and say to use the search as aways. Well, I had no luck.
thanks
Eric
#2
#4
#6
Just your key and a wrench. The manual tells you to turn the switch to the lock position, insert key and turn counter clockwise while holding the button under the switch. I never let mine go to the lock cause you can't turn the bars to do what ever work you've got to do. Plenty of info on the subject here, do a search, you'll find much more detailed instructions than I can give.
#7
Trending Topics
#8
I can see where that might work good. Gotta get me a set of those. They were on my Christmas list but Santa must have forgot them.
#9
#10
I Did it!
Gotta love hdforums...
you can find out how to do anything.
Got my handlebars in the perfect place now (rolled them back a bit...)
this helped too...
(Starting at 3:15 into it)
PS... I never did watch the whole thing, just a bit of it showed what I needed to know
you can find out how to do anything.
Got my handlebars in the perfect place now (rolled them back a bit...)
this helped too...
(Starting at 3:15 into it)
PS... I never did watch the whole thing, just a bit of it showed what I needed to know
Last edited by ebigfish; 06-13-2015 at 06:16 PM.
Thread
Thread Starter
Forum
Replies
Last Post
06, 07, 09, adjust, adjusting, adjusts, davidson, electra, glide, handlebar, handlebars, harley, ignition, instructions, remove, streeglide, street, streetglide, switch