What size are sportster axles?
#3
#4
The following 2 users liked this post by cHarley:
BlueridgeXL (03-20-2024),
hammer6315 (03-20-2024)
#5
The following 2 users liked this post by 07bobber:
BlueridgeXL (03-20-2024),
hammer6315 (03-20-2024)
#7
I have an 883.1200 with a 3/4" front and a 1" rear axles. I changed bearings and reinstalled them into a set of wire wheels. Bought a cheep hot plate from Walmart and heated the hub and tapped on opposite with a soft mallet. Bearings just fell out. Cooled bearings in the freezer and heated the new hub. The bearings slid back into the new wheels.
Fronts axles are:
'04 - '07: ¾"
'08+: 25mm
Rears axles are:
'04: ¾"
'05-'07: 1"
'08+: 25mm
Fronts axles are:
'04 - '07: ¾"
'08+: 25mm
Rears axles are:
'04: ¾"
'05-'07: 1"
'08+: 25mm
Last edited by trainman123; 08-20-2011 at 07:07 AM.
The following users liked this post:
BlueridgeXL (03-20-2024)
Trending Topics
#8
Hey all mind if I join the conversation? I could use some help with my project. Im trying to use wire wheels of both front and rear with a 1" axle on a 3/4 dyna axle frame. I am assuming you just cant slide a 1" alxe in place of both front and rear. Do they make a bearing kit to reduce the 1" to 3/4? or do I need to replace the swing arm and forks?
thanks in advance.
thanks in advance.
#10
The following users liked this post:
Noel Briffa (09-08-2022)