premium tour-pak luggage rack install
#1
premium tour-pak luggage rack install
Hi all, I have an '08 Electra Glide Classic. My wife just got me the large luggage rack for the Tour- Pak but I didn't get it yet...had to be ordered. I was wondering if anyone has mounted it themselves with the template and if so how did the drilling go? Do you have to relocate the FM antenna? I'm half afraid to go drilling holes in the lid... one little slip of the bit and disaster. Any advice would be helpful. thanks, Jim
#2
Use the template to get an idea where the rack goes, then put some blue painters tape at those four points. Set the rack on the tour pack and adjust position as required.Drill the first hole and temporarily bolt the rack down to check position of other marks and adjust as required. Not a big deal, just take your time and measure twice before you drill the holes. Also, it is easier to check location of rack with bike upright on a jack.
#5
#7
Trending Topics
#8
#9
There is no template for the rack. The template that comes with the rack is for the rear spoiler and they give it to you as a reference point for installing the rack. I found the tape method to be difficult since you cant really see the lines of the tour pack with tape in the way. I used some little adhesive rubber stoppers and put them on the feet of the tour pack. That way you could move the tour pack around and it wouldn't slide. Once I got it in position I marked around the feet of the legs with a sharpie and drilled.
#10
Yup, I too used the blue tape. Then took the USA in the center of the tour pak lid and an appropriate looking distance from the backrest ubtil it was just right. Then I called Mama in for the final approval. She moved it a thousandth or so and then I used the sharpie to mark the location she chose! Nothing to it.