Where can i find a big bore kit for my '08 1200 nightster?
#1
Where can i find a big bore kit for my '08 1200 nightster?
I've been looking but only found kits to upgrade from the 883.
Also, any ideas on an oil cooler? I'm not into the vertical type. I'm looking for a horizontal mount that fits on frame directly behind front tire. I talked to jpcycles.com they said that they don't make them for sporty's cause it wont fit.... BS.
My bike: http://www.youtube.com/user/joelspencer666
Also, any ideas on an oil cooler? I'm not into the vertical type. I'm looking for a horizontal mount that fits on frame directly behind front tire. I talked to jpcycles.com they said that they don't make them for sporty's cause it wont fit.... BS.
My bike: http://www.youtube.com/user/joelspencer666
#2
http://www.nrhsperformance.com/ekitsportster04.shtml
These are their dyno's one 88 inch kit shows 116 HP & 103 TQ, serious numbers for a Sportster. http://www.nrhsperformance.com/dynoroom.shtml
These are their dyno's one 88 inch kit shows 116 HP & 103 TQ, serious numbers for a Sportster. http://www.nrhsperformance.com/dynoroom.shtml
Last edited by HOTLAP; 07-31-2010 at 03:13 PM.
#3
I have a horizontal oil cooler that is a kind of a knock off of the old Lockhart oil cooler that I have on my XLCR and it mounts on the front of the frame but it needs a special bracket that I have and it fits my ’99 XL883 Sportster. I do not know if it will fit a later year frame because of the rubber motor mounts and the frame change that came on the ’04 and later Sportsters. I can check with the indy shop and see if it will fit and if it does, I can post up the part number for the oil cooler and the bracket number too so that you could order one from a shop near you or you and I can make a deal for the one that I already have that is new, unopened in the box, along with the new bracket that will be needed to mount the oil cooler to the frame. I should be able to post up YEA or NAY tomorrow on if it will fit or not. Until then, take care and ride safe out there!
#5
http://www.nrhsperformance.com/ekitsportster04.shtml
These are their dyno's one 88 inch kit shows 116 HP & 103 TQ, serious numbers for a Sportster. http://www.nrhsperformance.com/dynoroom.shtml
These are their dyno's one 88 inch kit shows 116 HP & 103 TQ, serious numbers for a Sportster. http://www.nrhsperformance.com/dynoroom.shtml
+1, They are probably the most informative, affordable and accessible.
#6
THANKS FOR THE INFO FELLAS,
I REALLY APPRECIATE IT. I'M EXCITED TO HAVE FOUND A BIG BORE KIT. NOW I GOTTA COME UP W/ $3,500.... SADLY IT MIGHT HAVE TO WAIT TILL I RETURN FROM MY VACATION TO AFGHANISTAN. UNLESS I CAN TALK THE WIFE INTO IT BEFORE I LEAVE....
-6SICK6
I REALLY APPRECIATE IT. I'M EXCITED TO HAVE FOUND A BIG BORE KIT. NOW I GOTTA COME UP W/ $3,500.... SADLY IT MIGHT HAVE TO WAIT TILL I RETURN FROM MY VACATION TO AFGHANISTAN. UNLESS I CAN TALK THE WIFE INTO IT BEFORE I LEAVE....
-6SICK6
Last edited by 6sick6; 08-03-2010 at 09:31 PM.
#7
Trending Topics
#8
Yeah NRHS is the way to go. They offer all kinds of good parts. I wanted to go with the 80" or 90" but with those you have to have your cases bored out and i like to do all my own work so it wasnt an option for me. BTW im in the F***in AFG right now and get to come home in another 6 weeks!!
Thread
Thread Starter
Forum
Replies
Last Post
JCleary
Touring Models
6
09-04-2013 02:05 PM
dblt74
Oil Archive (no new posts)
4
05-15-2010 09:32 PM