When did rubber mounted motors some out?
#1
When did rubber mounted motors some out?
My wife just started riding this year on an old Yamaha XS400 & she's already thinking of bumping up to a H/D. Because of the old "money factor" we're thinking of a used Sportster, but want to get a new enough one to have a rubber mounted motor. I tried a search, but couldn't find the answer. What year was the first year that Sportsters had rubber mounted motors?
#5
RE: When did rubber mounted motors some out?
My first pre requisite for my bike was that it had to be a harley (that determined budget/bike for me right there!)
Since I was looking at the Sportster line, the very next important item was that it HAD to be an '04 or newer because of the rubber mounted engines. I've seen and ridden on both and I can tell a difference. When the '04 engine sits at idle and runs in the chassis, you can definitely see that it was a MUCH needed improvement.
Yeah, nothing under an '04 for sure!!
Since I was looking at the Sportster line, the very next important item was that it HAD to be an '04 or newer because of the rubber mounted engines. I've seen and ridden on both and I can tell a difference. When the '04 engine sits at idle and runs in the chassis, you can definitely see that it was a MUCH needed improvement.
Yeah, nothing under an '04 for sure!!
#6
RE: When did rubber mounted motors some out?
Just for info, I was sitting next to a stock Rubber mounted Heritage Deluxe the other day at a stop light as we discussed the handlebar vibration. His were shaking MUCH worse than mine. Funny thing is, mine is a rigid mounted 91 Sportster. He explained that he needed to get some other add ons to really separate the engine and exhaust from the frame. I forgot just what add ons. We were riding in a pack of big Harley cruisers, so I began looking at the bars on them all. Most were vibrating worse than mine. They are bigger engines, of course.
My message is that you should not expect much less vibration from a stock rubber mounted Sportster engine. (I have seen those, and wonder why they hard mounted the exhaust?) It takes special exhaust connectors and other add on to really get the vibs out. Also, the rubber mounts tend to wear out and bust.
You might get the idea I don't really like the rubber mounts. Well, to me the vibration is part of what a Harley is all about. It does kinda suck that all of the screws will vibrate out unless you cement them
My message is that you should not expect much less vibration from a stock rubber mounted Sportster engine. (I have seen those, and wonder why they hard mounted the exhaust?) It takes special exhaust connectors and other add on to really get the vibs out. Also, the rubber mounts tend to wear out and bust.
You might get the idea I don't really like the rubber mounts. Well, to me the vibration is part of what a Harley is all about. It does kinda suck that all of the screws will vibrate out unless you cement them
The following users liked this post:
normannewguy (04-14-2018)
#7
Trending Topics
#8
#9
#10
RE: When did rubber mounted motors some out?
ORIGINAL: Broken Leg Rider
Just for info, I was sitting next to a stock Rubber mounted Heritage Deluxe the other day at a stop light as we discussed the handlebar vibration. His were shaking MUCH worse than mine. Funny thing is, mine is a rigid mounted 91 Sportster. He explained that he needed to get some other add ons to really separate the engine and exhaust from the frame. I forgot just what add ons. We were riding in a pack of big Harley cruisers, so I began looking at the bars on them all. Most were vibrating worse than mine. They are bigger engines, of course.
My message is that you should not expect much less vibration from a stock rubber mounted Sportster engine. (I have seen those, and wonder why they hard mounted the exhaust?) It takes special exhaust connectors and other add on to really get the vibs out. Also, the rubber mounts tend to wear out and bust.
You might get the idea I don't really like the rubber mounts. Well, to me the vibration is part of what a Harley is all about. It does kinda suck that all of the screws will vibrate out unless you cement them
Just for info, I was sitting next to a stock Rubber mounted Heritage Deluxe the other day at a stop light as we discussed the handlebar vibration. His were shaking MUCH worse than mine. Funny thing is, mine is a rigid mounted 91 Sportster. He explained that he needed to get some other add ons to really separate the engine and exhaust from the frame. I forgot just what add ons. We were riding in a pack of big Harley cruisers, so I began looking at the bars on them all. Most were vibrating worse than mine. They are bigger engines, of course.
My message is that you should not expect much less vibration from a stock rubber mounted Sportster engine. (I have seen those, and wonder why they hard mounted the exhaust?) It takes special exhaust connectors and other add on to really get the vibs out. Also, the rubber mounts tend to wear out and bust.
You might get the idea I don't really like the rubber mounts. Well, to me the vibration is part of what a Harley is all about. It does kinda suck that all of the screws will vibrate out unless you cement them