Touring 103 CAMS
#1
#2
TMan 525 or Andrews 54, maybe the 32 for solo touring and Andrews 26 or 48 or Woods 5-6 for two up and loaded touring; you could throw the SE255 into the last batch as well.
Why, because the are good cams for the application; all low and midrange peformers.
I am sure someone will throw the new Woods 555 into the mix but I don't know anything about it.
Why, because the are good cams for the application; all low and midrange peformers.
I am sure someone will throw the new Woods 555 into the mix but I don't know anything about it.
#4
#5
I just ordered the Woods tw555 this morning from Fuel-Moto USA. Click on the FuelMoto link on the right side of this page, they have all the dyno charts you need to see. The cams are actually made by Andrews, to Woods specs. Here is a good dyno comparison between the TW-555 and the SE-255. All I needed to see...
https://www.hdforums.com/forum/fuel-...t-archive.html
https://www.hdforums.com/forum/fuel-...t-archive.html
#6
i just did a woods 555 cam install on a 96 and iam real happy with it and this cam can be used in a 103 talk to keith at fuel moto they have done that same install on a 103. but u will find that there are alot of differant cams that can be used u just need to figure out what kinda riding will u be doing mostly. good luck on your decision.
#7
https://www.hdforums.com/forum/touri...ited-dyno.html
Read the thread posted above and check out the torque curve. I bet that bike is a blast to ride. When I upgrade my bike I will be going with a SE204.
Read the thread posted above and check out the torque curve. I bet that bike is a blast to ride. When I upgrade my bike I will be going with a SE204.
Trending Topics
#9