I have a 2000 FXDX that we have just fitted an S&S T111 engine in (carburettored).
The ECM is the S&S IST unit that comes with the engine.

OK this is what happens
- Turn on ignition
- ENGINE lights in red
- ENGINE light goes out
- ENGINE light comes on again and then goes off

If I start the bike it will run for about half a minute and then it seems to lose power and the ENGINE light comes on again.

I tried the diagnostic trouble codes
1- Turn Ignition switch to OFF & Run/Stop switch is to Run.
2- Push odometer reset button in & hold.
3- Turn ignition switch to Ignition and release odometer reset button.

The odometer shows d01CLr (presumably meaning diagnostic #1 clear)
press odometer reset button - now shows d02SEt (does that mean that diagnostic #2 is set?)
pressing the odometer reset button then displays d03CLr, d04CLr, d05CLr, d06CLr, d07CLr, d08CLr, d09CLr
the next press after that displays CAL 10 (whatever that means)
pressing it again starts the sequence again

What do these codes mean?

 

Sorry title should be 2000 FXDX diagnostic trouble codes

 

.
.
.
might be easiest to call S & S.
.
.
.