Softail Models Standard, Custom, Night Train, Deuce, Springer, Heritage, Fatboy, Deluxe, Rocker and Cross Bones.
Sponsored by:
Sponsored by:

largest size front tire for a 05 Fatboy?

  #1  
Old 06-14-2011, 09:40 AM
XARAN's Avatar
XARAN
XARAN is offline
Stellar HDF Member
Thread Starter
Join Date: Nov 2004
Location: So Cal
Posts: 3,156
Received 39 Likes on 32 Posts
Default largest size front tire for a 05 Fatboy?

Sorry if this has been posted, I tried a few searches - largest front tire fatboy, fatboy front tire and did not come up with anything.

What is the largest size tire that can be mounted on the stock front rim (I think it is a 3x16)

I looked at the metzler guide and I know for the rear with no mods a 160 is the largest but what about the front.

Stock is a MT90 (5.35 wide and 25.31 tall) can a 130/90 (5.59wide and 25.87 tall) or a 150/80 (6.02 wide and 25.43 tall) fit?

Anyone with pictures?

Thanks
 
  #2  
Old 06-14-2011, 10:09 AM
jreichart's Avatar
jreichart
jreichart is offline
Road Warrior
Join Date: Mar 2011
Location: Heber Springs, AR
Posts: 1,918
Likes: 0
Received 4 Likes on 4 Posts
Default

I replaced the pizza cutter on my '05 'Train this past winter with a 16x3. It's actually a stock rear rim, but same difference. I believe the '05 softails all have 16x3 rears so theoretically a Metz 160 will fit. Unfortunately, Metz doesn't make a 160 front, so I went with a 150.

As far as fitment with the forks, plenty of room. If you plan on retaining the stock fender, the fit with a 150 will be very tight. Might have to do some grinding on the return lip of the fender to make it work. I have a used fatboy fender I'm planning on chopping up, might try to work on it today. I'll throw it on before I slice it and see what the clearances are.
 
  #3  
Old 06-14-2011, 11:04 AM
DR. V-TWIN's Avatar
DR. V-TWIN
DR. V-TWIN is offline
Former Sponsor
Join Date: Jan 2009
Location: Los Angeles, CA
Posts: 19,364
Likes: 0
Received 39 Likes on 38 Posts
Default

I think a 140 will fit, but not sure on a 150. WARG has a 140 on an aftermarket rim and it fits under the rear fender.

Drew
 
  #4  
Old 06-14-2011, 11:10 AM
XARAN's Avatar
XARAN
XARAN is offline
Stellar HDF Member
Thread Starter
Join Date: Nov 2004
Location: So Cal
Posts: 3,156
Received 39 Likes on 32 Posts
Default

Thanks for the info.

I dont see any one making a 140/90-16 for the front only 130/90-16 or 150/90-16

What is the difference between a front tire design and a rear and is it safe to use a rear tire on the front?
 
  #5  
Old 06-14-2011, 11:12 AM
DR. V-TWIN's Avatar
DR. V-TWIN
DR. V-TWIN is offline
Former Sponsor
Join Date: Jan 2009
Location: Los Angeles, CA
Posts: 19,364
Likes: 0
Received 39 Likes on 38 Posts
Default

He has an 18" rim I just remembered. I am not sure on teh fitment of a 150 on teh front. As far as the difference in the tires, I am not sure either. Hopefully someone else knows.

Drew
 
  #6  
Old 06-14-2011, 08:45 PM
jreichart's Avatar
jreichart
jreichart is offline
Road Warrior
Join Date: Mar 2011
Location: Heber Springs, AR
Posts: 1,918
Likes: 0
Received 4 Likes on 4 Posts
Default

I was buggerin around in the garage today, and checked the clearances. I mounted the fender up and it clears the Metzler 150, but not by much! There is less than 1/4" between the fender lip and the sidewall of the tire. A bit too close for my taste. But, if you grind off that stupid return lip on the factory fender, then there's gobs of room! I took a couple pics, but they might be tough to see.
 
Attached Thumbnails largest size front tire for a 05 Fatboy?-img_0016.jpg   largest size front tire for a 05 Fatboy?-img_0019.jpg   largest size front tire for a 05 Fatboy?-img_0021.jpg  
  #7  
Old 06-14-2011, 08:55 PM
WARG's Avatar
WARG
WARG is offline
Elite HDF Member
Join Date: Jan 2006
Location: The Lone Star State
Posts: 4,357
Likes: 0
Received 10 Likes on 9 Posts
Default

Yep, I'm running a 140 up front and a 150 in the rear. Both avons on 18" rims.
 
  #8  
Old 06-15-2011, 09:22 AM
XARAN's Avatar
XARAN
XARAN is offline
Stellar HDF Member
Thread Starter
Join Date: Nov 2004
Location: So Cal
Posts: 3,156
Received 39 Likes on 32 Posts
Default

Originally Posted by jreichart
I was buggerin around in the garage today, and checked the clearances. I mounted the fender up and it clears the Metzler 150, but not by much! There is less than 1/4" between the fender lip and the sidewall of the tire. A bit too close for my taste. But, if you grind off that stupid return lip on the factory fender, then there's gobs of room! I took a couple pics, but they might be tough to see.
Looks pretty close.........

Thanks for the info
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
matthewjohn
Softail Models
5
03-14-2019 07:04 AM
bogie
Softail Models
16
05-18-2010 07:02 PM
fatboytc8800
Softail Models
4
04-24-2010 03:45 PM
KumaRide
Softail Models
5
02-24-2010 07:45 AM
roysays
Frame/Suspension/Front End/Brakes
2
10-09-2008 12:18 AM


Thread Tools
Search this Thread
Quick Reply: largest size front tire for a 05 Fatboy?



All times are GMT -5. The time now is 07:05 PM.