cruise control not working
06-26-2011, 06:11 PM
Join Date: May 2011
Location: Myrtle Beach
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
cruise control not working
2002 ultra cruise control not working. the light comes on when you flip the switch, but cruise does not engage. What can I check?
06-26-2011, 06:27 PM
Join Date: May 2009
Location: Bastrop, LA
Posts: 263
Likes: 0
The cruise control is very sensitive. Sometimes it may be the connections and sometimes it may require that you go through the set-up procedures that are listed in your manual. Maybe try to go back through the set-up in the manual. If that does not fix the problem, then check your connections.
06-26-2011, 06:31 PM
Join Date: Jun 2011
Location: Gilbert
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
I have the same problem. I have checked anything yet let me know what you find out. I have a 2002 rk classic thanks
06-26-2011, 06:34 PM
Join Date: Nov 2010
Location: Oxford, Nc
Posts: 17,458
Could be as simple as a broken/frayed control cable. I lost one on my 98 Ultra.
06-26-2011, 06:36 PM
Join Date: Jun 2011
Location: Gilbert
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
I have a 2002 rk classic with 95 big boar kit, 2 into1 thunder header with power commander. Getting ready to install cams and either doing new hydraulic or gear. Any good or bad info to help me make my mind up. 510 cams is what i was thinking
06-26-2011, 06:37 PM
Join Date: Jun 2008
Location: Ohio
Posts: 3,795
06-26-2011, 06:38 PM
Join Date: Jun 2006
Location: Cape Cod, Ma.
Posts: 723
I'm having the same problem with my 02. 07DDreamHD, jgann and I have cable operated throtles. I don't think there is any re-set procedure that I have found. If anyone knows of something I would love to hear it. My prblems started after I installed braided brake lines. The switch lights up, the fuse is good but no cruise (no green "C" on the dash). The brake lights work as they are supposed to when the the brakes are applied. Any thoughts?
Neil
RDMC
06-26-2011, 06:39 PM
Join Date: Jun 2006
Location: Southeast GA
Posts: 1,992
Likes: 0
Follow your throttle cable from the handlebars. You'll find a switch. Unplug one wire from the switch. Ride the bike and check the cruise. If it works, replace the switch.
06-26-2011, 07:12 PM
Join Date: Aug 2007
Location: 40 mi South of Pittsburgh
Posts: 129
Is the rear brake light lit all the time? My rear brake switch went, cruise didn't work & the brake light stayed on all the time.
06-27-2011, 12:37 AM
Join Date: Sep 2005
Location: Minnesota
Posts: 2,600
Check both brake light switches.