2010 Wide Glide w/ 23" Front wheel & 18" Rear Wheel
#1
2010 Wide Glide w/ 23" Front wheel & 18" Rear Wheel
Im on the verge of pulling the trigger and buying a 23" wheel for the front and 18" wheel for the rear for my 2010 wide glide.
I would like to know who has done this and what width rims and tires were used. Besides the front fender Im going to lower the front about 1/2" which I think should level the bike out.
Please post some pics of wide glides, I DONT WANT to see pics of Baggers or softails, that I see all the time.
Wide Glides or Dynas only and info on their setups
I would like to know who has done this and what width rims and tires were used. Besides the front fender Im going to lower the front about 1/2" which I think should level the bike out.
Please post some pics of wide glides, I DONT WANT to see pics of Baggers or softails, that I see all the time.
Wide Glides or Dynas only and info on their setups
#4
#6
#7
Trending Topics
#8
#9
One person has done it here. He has ordered the stuff but I havent seen a pic yet. A 23" in front will only add 1" of height to the front. 1" above the hub 1" below. I would like to do it but I would now just do the front so the rear stays as low as possible. I priced it and a 23" front with a tire is $1k.
Btw, you dont need a lowering kit. Pop the caps and either cut the spacer tube 1" or get 1 1/4" pvc and make your own. Was not happy with the Burley front kit and took it out. Burley uses Progressive btw.
Btw, you dont need a lowering kit. Pop the caps and either cut the spacer tube 1" or get 1 1/4" pvc and make your own. Was not happy with the Burley front kit and took it out. Burley uses Progressive btw.