Clean your IAC
#1
Join Date: Apr 2011
Location: East of the USS Midway
Posts: 2,555
Likes: 0
Received 6 Likes
on
6 Posts
Clean your IAC
Best thing I found to clean your IAC Sensor is CRC Mass Air Flow Sensor Spray Cleaner for about $8.99 4-5 short blasts in the sensor hole while cycling the sensor with a lint free cloth underneath the sensor and also clean your Induction Module after with CRC Throttle Body & Intake Cleaner Spray @ 5.99 what a difference my SG runs like new! can buy both at Napa or your local parts store.
#2
I've saved your suggestion. Are you cleaning on a schedule? I did that a while back when I was trying to track-down some idling issues, later linked to the TPS, and used WD-40 and maybe solvent (Naphtha) as well. Both are good at cutting crud like that which forms in the IAC orifice, but the product you describe sounds like its made for use in that area.
#3
Join Date: Apr 2011
Location: East of the USS Midway
Posts: 2,555
Likes: 0
Received 6 Likes
on
6 Posts
I've saved your suggestion. Are you cleaning on a schedule? I did that a while back when I was trying to track-down some idling issues, later linked to the TPS, and used WD-40 and maybe solvent (Naphtha) as well. Both are good at cutting crud like that which forms in the IAC orifice, but the product you describe sounds like its made for use in that area.
#5
#7