You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join HDForums.com community today!
Hi everyone, I am working on a 94 Sportster that is converted to a trike, The original front end is replaced by a raked aftermarket Wide Glide unit, the sporty's risers and bars were reused, The problem is that there is no place for the indicator lights anymore, the speedo mounts to the lower handle bar clamp bolts in it's own housing and the indicator lights USED to be mounted in the headlamp visor that the stock sporty had, That no longer fits and I don't want to make it fit as we have also switched the headlamp. Does anyone make a housing to mount the indicator lights in? Turn, neutral, oil, high beam? Thanks for any input.
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on HD Forums!
you can get some small LED's and bend and polish a piece of alum and mount them in your lower riser bolt... i tapped them into my dash when i did a LR dash conversion on my st bob
__________________
The Powder Pro www.thepowderpro.com
Joe Knapp, Chicago IL
Custom powdercoating work, fork bag stereo's, and much more
Radio Shack carries very small round indicator lights in various colors that can be installed in the backside of the handlebars by drilling and the bars. Run the wires through the bars and drop wiring alongside the riser under the tank.
Looking for place to mount indicator light's
