Tank Bib or not to tank bib
#1
Tank Bib or not to tank bib
I'm pulling my Switch apart to powder coat the front end and console. I'm wasn't planning on not running a tank bib but it doesn't look horrible without it. I can't stand the factory design I'm looking for something custom if I do replace it.
pictures of different bibs would be cool and opinions on running one or not also..
#4
#6
I run the Mustang Tank and Fender Bibs on my FXDF. The fender bib to help cover some of the scratches from the original seat before i got the bike.
I run the tank bib because i think it looks alright and i love the extra easy access pocket. I dont have pics but can snap a couple if you want em.
I run the tank bib because i think it looks alright and i love the extra easy access pocket. I dont have pics but can snap a couple if you want em.
#7
Thanks man, it is fiberglass. Rocket Bobs is the shop that made it, I saw they built one for their BlackBird bike and I sent them an email asking them to make me one. Havent seen it before on any other style bike, especially the dyna.
The following users liked this post:
motorbikemike48 (07-27-2016)
Trending Topics
#8
#9
Thanks man the clean look is what i was shooting for. I paid about 375 for it shipped. which is pretty expensive for what it is but I have 0 experience with fiberglass, and when I spoke to a friend (who has some experience but not alot) about how I may want to try it..he laughed said its way harder than I think. I also like the motogadget speedo also but they said it would cost 850 or something so I opted out of that one.
The following users liked this post:
Dyna rider 78 (07-28-2016)
#10
thanks MFC for the help .. awhile ago i saw this thread ..
https://www.hdforums.com/forum/dyna-...hed-oh-my.html
and asked gartec81 (ty) about his dash delete panel .. he fab-ed his out of ..
(his reply) .. "I cut two discs of stainless and made my own blank."
personally i am not "set up" to work metal so i sketched out something i could do in Fiber-Glass .. i do have those skills as i was a mold and pattern maker in a former life.
interesting .. my design and the one that you obtained from Rocket Bobs are within a nats eye of each other. i did have visible screws for attachment ... as i hadn't thought that far to come up with a blind method ..
?? how is yours fasted in place ??
your friend is correct .. it isn't a cake walk to make .. but it isn't a mars expedition either .. Rocket Bobs isn't giving them away .. and given that .. i may just have to come up with my own next winter .. it would be a good project for then ..
if i did it .. how many of you guys would be interested in obtaining one ?? can't see it being a 375$ part
thanks again MBM48
https://www.hdforums.com/forum/dyna-...hed-oh-my.html
and asked gartec81 (ty) about his dash delete panel .. he fab-ed his out of ..
(his reply) .. "I cut two discs of stainless and made my own blank."
personally i am not "set up" to work metal so i sketched out something i could do in Fiber-Glass .. i do have those skills as i was a mold and pattern maker in a former life.
interesting .. my design and the one that you obtained from Rocket Bobs are within a nats eye of each other. i did have visible screws for attachment ... as i hadn't thought that far to come up with a blind method ..
?? how is yours fasted in place ??
your friend is correct .. it isn't a cake walk to make .. but it isn't a mars expedition either .. Rocket Bobs isn't giving them away .. and given that .. i may just have to come up with my own next winter .. it would be a good project for then ..
if i did it .. how many of you guys would be interested in obtaining one ?? can't see it being a 375$ part
thanks again MBM48
Last edited by motorbikemike48; 07-27-2016 at 08:46 PM.