wide glide risers vs. street bob risers
#1
#2
RE: wide glide risers vs. street bob risers
07 SB stock risers are 2”.
If that’s any help?
I put 3” risers on my SB see below link:
https://www.hdforums.com/m_3099943/tm.htm
#5
RE: wide glide risers vs. street bob risers
ORIGINAL: bobby5
Yeah i was wondering what stock wide glide risers are? If there taller would they fit on a street bob?
Yeah i was wondering what stock wide glide risers are? If there taller would they fit on a street bob?
keep this in mind -
StrBob bars are 1 inch diameter,
WideGlide bars are 1 1/4" diameter.
mud
#6
RE: wide glide risers vs. street bob risers
ORIGINAL: mudpuddle
Bobby, WG risers will fit '06 '07 StrBob, but,
keep this in mind -
StrBob bars are 1 inch diameter,
WideGlide bars are 1 1/4" diameter.
mud
Bobby, WG risers will fit '06 '07 StrBob, but,
keep this in mind -
StrBob bars are 1 inch diameter,
WideGlide bars are 1 1/4" diameter.
mud
Come to think of it, though: do FXDWG bars have the reduced 1" OD sections at the riser mount? Many phat bars do. If so, you could still use the risers with your FXDB bars.
Priest
[IMG]local://upfiles/29151/16D7883F18B743B19A085BC51884BA3F.jpg[/IMG]
#7
RE: wide glide risers vs. street bob risers
ORIGINAL: Priest
So, guess you'll have to convert to the FXDWG bars too!! [They're the same height, aren't they Mud?]
Come to think of it, though: do FXDWG bars have the reduced 1" OD sections at the riser mount? Many phat bars do. If so, you could still use the risers with your FXDB bars.
Priest
ORIGINAL: mudpuddle
Bobby, WG risers will fit '06 '07 StrBob, but,
keep this in mind -
StrBob bars are 1 inch diameter,
WideGlide bars are 1 1/4" diameter.
mud
Bobby, WG risers will fit '06 '07 StrBob, but,
keep this in mind -
StrBob bars are 1 inch diameter,
WideGlide bars are 1 1/4" diameter.
mud
Come to think of it, though: do FXDWG bars have the reduced 1" OD sections at the riser mount? Many phat bars do. If so, you could still use the risers with your FXDB bars.
Priest
Priest, the WG bars are the same height, yes.
No, they do not neck down to one inch in the riser area.
I went with WG inch and a quarterbars/risers on my 06 SuperGlide.
mud...............
Trending Topics
#10