Wanted : 8 Inch FAT Black Risers
#11
10-15-2009, 09:46 AM
Join Date: Mar 2009
Location: Connecticut / Amsterdam
Posts: 2,717
Likes: 0
Received 0 Likes
on
0 Posts
Risers
Wild1 has 9.5" straight black risers...
http://www.wild1inc.com/orderWO530SB.html
Buy them, cut them down, drill and tap.
http://www.wild1inc.com/orderWO530SB.html
Buy them, cut them down, drill and tap.
I'm not mechanically inclined
#12
10-15-2009, 09:50 AM
Join Date: Mar 2009
Location: Connecticut / Amsterdam
Posts: 2,717
Likes: 0
Received 0 Likes
on
0 Posts
#13
10-15-2009, 09:55 AM
Join Date: Mar 2009
Location: Connecticut / Amsterdam
Posts: 2,717
Likes: 0
Received 0 Likes
on
0 Posts
Risers
too and i like the flat top with the exposed srews ... 
http://www.covingtonscyclecity.com/#scene=Risers
#16
10-15-2009, 10:56 AM
Join Date: Mar 2009
Location: Connecticut / Amsterdam
Posts: 2,717
Likes: 0
Received 0 Likes
on
0 Posts
6 inch rise
#17
10-15-2009, 10:58 AM
Join Date: Mar 2009
Location: Connecticut / Amsterdam
Posts: 2,717
Likes: 0
Received 0 Likes
on
0 Posts
Thank you anyway
You know forgot I had on 6 inch skinny risers ( as a mock up ) the same height as the night train
a couple a weeks ago for my other bars ( sold them ) and the height is right i don't need the 8 the 6 will be fine and they will be the Covingtons , so i'm all set now ! I'm debated what kind of bars yet...
a couple a weeks ago for my other bars ( sold them ) and the height is right i don't need the 8 the 6 will be fine and they will be the Covingtons , so i'm all set now ! I'm debated what kind of bars yet...
#18
10-15-2009, 05:16 PM
Advanced
Join Date: Jan 2009
Location: ROSE TOWN 707
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
185 bucks for risers?!?! Holy ****! Forget that. Hey man I got a solution for you... Buy 6" black risers off ebay or craigslist, then go down to you nearest metal shop, buy a 2" piece of solid steel stock, take it to a lathe, drill a hole through the center, clean and polish, paint, and BINGO! you got your self some 2" risers that you can add to the 6" ones. Make sure you get longer screws because you have to pass the 2" homemade risers. I did this at the welding shop I work at and it works great.
Last edited by kromer4life; 10-15-2009 at 05:18 PM.
#20
10-15-2009, 05:48 PM
Join Date: Mar 2009
Location: Connecticut / Amsterdam
Posts: 2,717
Likes: 0
Received 0 Likes
on
0 Posts
Black Risers
185 bucks for risers?!?! Holy ****! Forget that. Hey man I got a solution for you... Buy 6" black risers off ebay or craigslist, then go down to you nearest metal shop, buy a 2" piece of solid steel stock, take it to a lathe, drill a hole through the center, clean and polish, paint, and BINGO! you got your self some 2" risers that you can add to the 6" ones. Make sure you get longer screws because you have to pass the 2" homemade risers. I did this at the welding shop I work at and it works great.
http://cgi.ebay.com/ebaymotors/HARLE...Q5fAccessories