02-18-2015, 10:49 AM
Last edit by: IB Advertising
Thug Style / Club Style Dyna pic's
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
Thug Style / Club Style Dyna pic's
#7611
05-12-2015, 08:46 AM
Intermediate
Join Date: Jan 2015
Location: Hamburg
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Seat
Cool bike, i like it. What Seat is on it?
Thanks from Hamburg, Germany
#7612
05-13-2015, 02:25 AM
1st Gear
Here's my 03 FXDS with 14" west coast Tbars, thunderheader exhaust, 1/4 fairing with laminar lip and extreme cycle radio tucked behind the fairing.
Last edited by Geno_osrmc; 05-14-2015 at 02:58 AM. Reason: update
#7613
05-13-2015, 09:41 AM
I have been waiting for the Day that I could post in this thread! You all have Awesome bikes, and ive gotten so many inspirational ideas from you all.
Heres my 2013 FXDB
12" WestCoast T Bars, Memphis Shades Cafe Fairing, Vance and Hines Short Shots.
The pipes were on the bike when I bought it. I want to get an RSD Slant Raw Finish.... when I have an extra $1000 layin around.
Heres my 2013 FXDB
12" WestCoast T Bars, Memphis Shades Cafe Fairing, Vance and Hines Short Shots.
The pipes were on the bike when I bought it. I want to get an RSD Slant Raw Finish.... when I have an extra $1000 layin around.
#7615
05-13-2015, 11:27 AM
So Ive got the "Further Forward Mids" to check clearance and mount if I can.
As you can see, my exhaust blocks the mounting point. The pipes are too close to the bolt heads, which are allen heads, to get a wrench in there.
Anybody have a trick I can use that negates removal of my exhaust to get to the mount?
I just don't want to take my pipes off. I suppose its not a big deal, just don't want to.
I thought about the possibility of lowering my engine.
As you can see, my exhaust blocks the mounting point. The pipes are too close to the bolt heads, which are allen heads, to get a wrench in there.
Anybody have a trick I can use that negates removal of my exhaust to get to the mount?
I just don't want to take my pipes off. I suppose its not a big deal, just don't want to.
I thought about the possibility of lowering my engine.
#7616
05-13-2015, 11:42 AM
So Ive got the "Further Forward Mids" to check clearance and mount if I can.
As you can see, my exhaust blocks the mounting point. The pipes are too close to the bolt heads, which are allen heads, to get a wrench in there.
Anybody have a trick I can use that negates removal of my exhaust to get to the mount?
I just don't want to take my pipes off. I suppose its not a big deal, just don't want to.
I thought about the possibility of lowering my engine.
As you can see, my exhaust blocks the mounting point. The pipes are too close to the bolt heads, which are allen heads, to get a wrench in there.
Anybody have a trick I can use that negates removal of my exhaust to get to the mount?
I just don't want to take my pipes off. I suppose its not a big deal, just don't want to.
I thought about the possibility of lowering my engine.
#7617
05-13-2015, 11:42 AM
I have been waiting for the Day that I could post in this thread! You all have Awesome bikes, and ive gotten so many inspirational ideas from you all.
Heres my 2013 FXDB
12" WestCoast T Bars, Memphis Shades Cafe Fairing, Vance and Hines Short Shots.
The pipes were on the bike when I bought it. I want to get an RSD Slant Raw Finish.... when I have an extra $1000 layin around.
Heres my 2013 FXDB
12" WestCoast T Bars, Memphis Shades Cafe Fairing, Vance and Hines Short Shots.
The pipes were on the bike when I bought it. I want to get an RSD Slant Raw Finish.... when I have an extra $1000 layin around.
I have the same exhaust and looking to change it out.
-SJ
#7619
05-13-2015, 02:50 PM
I have been waiting for the Day that I could post in this thread! You all have Awesome bikes, and ive gotten so many inspirational ideas from you all.
Heres my 2013 FXDB
12" WestCoast T Bars, Memphis Shades Cafe Fairing, Vance and Hines Short Shots.
The pipes were on the bike when I bought it. I want to get an RSD Slant Raw Finish.... when I have an extra $1000 layin around.
Heres my 2013 FXDB
12" WestCoast T Bars, Memphis Shades Cafe Fairing, Vance and Hines Short Shots.
The pipes were on the bike when I bought it. I want to get an RSD Slant Raw Finish.... when I have an extra $1000 layin around.
