Dyna Glide Models Super Glide, Super Glide Sport, Super Glide Custom, Dyna Glide Convertible, Super Glide T-Sport, Dyna Glide Police, Dyna Switchback, Low Rider, Street Bob, Fat Bob and Wide Glide.
Sponsored by:
Sponsored by:

Tank Badge Replacement

Thread Tools
 
Search this Thread
 
  #1  
Old 02-11-2010, 06:58 PM
skunkdog's Avatar
skunkdog
skunkdog is offline
Intermediate
Thread Starter
Join Date: Aug 2009
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts
Default Tank Badge Replacement

Trying to get that old school look for my 09' street bob, so I ordered a set of 59'-60' FL tank badges. I figured they would look great with the Flying Wheel derby and timer covers I have on the bike.

Great! Or so I thought until I removed the existing badges.

If you look closely at tank picture you can just make out what I would basically describe as ghosted tank badges on both sides of my tank outlining the original badge.

Not sure what to do now.
 
Attached Thumbnails Tank Badge Replacement-p2100023.jpg   Tank Badge Replacement-p2100027.jpg  
  #2  
Old 02-11-2010, 07:13 PM
crsowa's Avatar
crsowa
crsowa is offline
Tourer
Join Date: Jan 2009
Location: Muskegon, MI
Posts: 434
Likes: 0
Received 0 Likes on 0 Posts
Default

huh... never had that problem with mine...
 
  #3  
Old 02-11-2010, 07:16 PM
DMV11982's Avatar
DMV11982
DMV11982 is offline
Cruiser
Join Date: Mar 2009
Location: Virginia Beach
Posts: 242
Received 0 Likes on 0 Posts
Default

Damn..now i am thinking twice about taking mine off!!
 
  #4  
Old 02-11-2010, 07:22 PM
jimsflh's Avatar
jimsflh
jimsflh is offline
Outstanding HDF Member
Join Date: Aug 2008
Location: Michigan
Posts: 3,078
Likes: 0
Received 6 Likes on 6 Posts
Default

Originally Posted by skunkdog
Trying to get that old school look for my 09' street bob, so I ordered a set of 59'-60' FL tank badges. I figured they would look great with the Flying Wheel derby and timer covers I have on the bike.

Great! Or so I thought until I removed the existing badges.

If you look closely at tank picture you can just make out what I would basically describe as ghosted tank badges on both sides of my tank outlining the original badge.

Not sure what to do now.
Well ya prolly have a little fading from the sun everywhere but where the badges were. unless it's just a residue outline, in which case it should come off with some polishing compound or goo-gone
 
  #5  
Old 02-11-2010, 07:22 PM
skunkdog's Avatar
skunkdog
skunkdog is offline
Intermediate
Thread Starter
Join Date: Aug 2009
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts
Default

The badges came off ok, not any different form others I've removed. A little blow dryer action and some goo gone.......

Can't really rub it out, flat denim blue paint. I wonder if I could have the tank touched up?
 
  #6  
Old 02-11-2010, 07:29 PM
skunkdog's Avatar
skunkdog
skunkdog is offline
Intermediate
Thread Starter
Join Date: Aug 2009
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by jimsflh
Well ya prolly have a little fading from the sun everywhere but where the badges were. unless it's just a residue outline, in which case it should come off with some polishing compound or goo-gone
At first I thought it was faded too. It actually appears shiney around the outside edges of where the adhesive was.....almost polished. It is darker where the adhesive covered the tank.
 
  #7  
Old 02-11-2010, 07:42 PM
jss1975snow's Avatar
jss1975snow
jss1975snow is offline
Cruiser
Join Date: Jul 2009
Location: Delaware/Colorado
Posts: 235
Likes: 0
Received 1 Like on 1 Post
Default

ignore it and it will go away, i had the same problem
 
Attached Thumbnails Tank Badge Replacement-dsc06134.jpg  
  #8  
Old 02-11-2010, 08:17 PM
Wonkaboy's Avatar
Wonkaboy
Wonkaboy is offline
Banned
Join Date: Mar 2009
Location: Connecticut / Amsterdam
Posts: 2,717
Likes: 0
Received 0 Likes on 0 Posts
Default

No need to repaint , use some windex and a micro cloth it will eventually fade away .....
 
  #9  
Old 02-11-2010, 08:17 PM
Karsten's Avatar
Karsten
Karsten is offline
Road Captain
Join Date: Jul 2008
Location: Brigham City, Utah
Posts: 738
Likes: 0
Received 6 Likes on 6 Posts
Default

I have the same issues after removing my 06 Street Bob emblems. At 1st I figured it to be due to the original owner was limited to a carport so the bike sat up side 365 days a year most likely.

I was having a front fender painted at a local shop and while waiting a took advantage of the free pick up and delivery offered my the local dealership (winter month deal). Talking to him he told me Denim Paint was intended to fade/weather like a pair of jeans...hence Denim.

I stopped the paint shop from doing the fender, ordered a couple cans of Color Rite Demin Black and plan to spray the fender and sides of the tank when it warms up.

After that I hope to add the White Star Vintage HD emblems.

Karsten
 
  #10  
Old 02-11-2010, 08:47 PM
skunkdog's Avatar
skunkdog
skunkdog is offline
Intermediate
Thread Starter
Join Date: Aug 2009
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by jss1975snow
ignore it and it will go away, i had the same problem
I've windexed it. How long did it take for yours to go away?
 


Quick Reply: Tank Badge Replacement



All times are GMT -5. The time now is 12:11 AM.