 |
11-17-2010, 02:05 AM
|
|
|
Big Boyz Head Work? Opinions Please...
Still kinda new to this forum stuff so if im stepping on toes or in the wrong place kindly direct me to the right one LOL...
Now that thats outta the way Id like to know who has used the "street" head work by Big Boyz and what kind of impression you have. If possible id like to know what results with what setups everyone has. And also if there is anything comparable to the Big Boyz "street" head work someone else has used and likes.
Tryin to get to that magical 100/100 while maintaining reliability and rideablility. Did i mention its not in my budget to spend 1200 just on heads??? LMAO
Thanks in advance for any help you all can offer, and cheers!!
Oh, and call me ROSCOE
|
|
|
__________________
123hp 117ft lbs
103" Tman Jugs & Pistons, Tman stage III Heads, Tman 662-1 cams.
S.E 4-3/8" flywheel, cam plate, lifters, adj pushrods, S.E Race tuner, HPI 55mm TB,
Timken bearing, Zippers MAX flow A/C, D&D fat cat , And alot more...
|
11-17-2010, 02:13 AM
|
|
|
http://deweysheads.com/ Don Dorfman did my heads and my 97" bore. My bike rips, Check him out.
__________________
2006 FXDBI / 95" / Andrews 37H / SE 1.725 rockers
Head Designs By Dewey / 1.90 intake / 10:1 CR
Rinehart 2-1 / SE compensator / TTS MasterTune
Tuned by Doc's Performance Tuning, Minneola FL
"The United States is a nation of laws: badly written and randomly enforced." - Frank Zappa
|
11-17-2010, 03:08 AM
|
|
|
Quote:
Originally Posted by thedonthere
|
Awesome thanks!
Thats deffinatly in my price range, so youre pleased with his work?
Could you give me more specs on your build? Ever been dyno'd? Im chasing that unicorn. LOL
Im starting out with an 05 fxdxi i have another thread listing what i have and what id like if you care to give your advice.
__________________
123hp 117ft lbs
103" Tman Jugs & Pistons, Tman stage III Heads, Tman 662-1 cams.
S.E 4-3/8" flywheel, cam plate, lifters, adj pushrods, S.E Race tuner, HPI 55mm TB,
Timken bearing, Zippers MAX flow A/C, D&D fat cat , And alot more...
|
11-17-2010, 07:39 AM
|
|
|
I have had quite a bit of work done by www.larrysmotorcyclemachine.com Larry has been porting heads for years and really knows his way around 95" Twin Cams. He did my heads, bored my cases, bored my old cylinders, welded and trued my crank, did my timken bearing upgrade. I just picked up a set of EVO heads from him for my winter EVO build. Joe Knapp, a member here is also using his heads with great results.
I'm not going to blow a bunch of hot air and say he is the best around, but definatley someone to look into. There are tons of good porters out there. Give them a call and talk to them personally and see what they have to say. If you call Larry, leave a message. He will call you back.
__________________
2007 Street Glide
Nitrous fed 124", Chopped, Raked, Stretched with a 26"
|
11-17-2010, 08:05 AM
|
|
|
In Don's signature, third line down, he has posted "103hp 106tq" ... guess if you could match his build, you'd have met your goal ....
R/
'Chop
__________________
'05 FXDI Super Glide
-Screamin Eagle 95", SE MCR Performance Heads, Andrews TW37B Cams
-Dennis Goodson Air Cleaner, Paughco Exhaust, ThunderMax w/ Auto Tune
-FLST Front End, Race Tech Springs and Gold Valve
-BDL Enclosed Belt Drive, FLST Floorboards
|
11-17-2010, 09:17 AM
|
|
|
I'm happy with my Big Boyz heads, WFO Larry and Deweys/Don are also well known and respected porters and you can't go wrong with any of them.
|
11-17-2010, 10:33 AM
|
|
|
Guys thanks so much for the advice youve offered up, i really appreciate it. Ill keep everyone poeted on the progress, and I know Ill have alot more questions for everyone. Thanks again...
CHEERS!! :icon_beerch ug: :i con_beerchug:
__________________
123hp 117ft lbs
103" Tman Jugs & Pistons, Tman stage III Heads, Tman 662-1 cams.
S.E 4-3/8" flywheel, cam plate, lifters, adj pushrods, S.E Race tuner, HPI 55mm TB,
Timken bearing, Zippers MAX flow A/C, D&D fat cat , And alot more...
|
|
Tags
|
american, big, boyz, davidson, don, dorfman, harley, head, heads, larry, pictures, porting, street, wfo, work  |
| Thread Tools |
Search this Thread |
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
