Okay, I am changing out my front brake line to the diamond-black modular. I need stock +4-6 inches.

I seen on page 616. my OEM stock # is 42740-10 and the Diamond-Black upper and lower #'s are 41800122 and 48926-10 respectively. I did not see them on page 619 to find length or anything.

I know the lower length stays stock and that the upper is where the different length comes in. It looks like the lower would be 24" and I would need a 28"-30" upper but I also NEED a 35 degree banjo instead of the stock 90 degrees.

I just need the part number for this if it exists.

any help for me? thanks a lot~!!!

Mike

 

Check out magnum shielding's web site, you can find stock length in their online part finder.

http://magnumshielding.com/

 

You are the second member here that has referred me to them and I must say the black pearl line is exactly what I want. MS staff is quick to answer questions too! I already have everything I need, now I just need to order it when I get home.

 

For the past few years I have been using their products, so far, they have held up extremely well, where others have yellowed, they have stayed perfect, zero complaints.

Their selector on their site makes figuring out what cables you need is also very easy to use, and they ship quick.

 

Here's a link to an Instruction Sheet on MODULAR BRAKE LINE KITS.

The general part has a list of p/n's and dimensions.

Next to that here's another link to a H-D document on brake lines....

I hope this will help!