Street Bob Riser adaptor for regular riser.
#11
Obviously there is a need for it if multiple companies are coming out with it.
As for companies "ripping it off" if they really are, then the lawyers can make some money, but I seriously doubt that is the case.
I have little doubt that if a small company came up with this, they might very well turn to a company like Custom Chrome for their marketing reach.
To the OP, thanks for posting, I am sure some will find it very useful.
#12
How to change out top of triple tree on FXDB
Step 1: We assume you are replacing the original bars and they are off already. Secure front wheel, preferably supported in a wheel chock; put a jack under the front end of the frame and lift to the point that most but not all the weight is off the front wheel.
Step 2: Remove the two torx head screws from each side of top piece of your triple tree. Remove the screw securing the the brake line to the triple tree. Unscrew the large chrome cap that covers the center bolt on top of the tree. Remove 1 1/2" nut (this socket is not in most tool kits but the socket and 3/4 to 1/2" adapter can be had for less than $15) and washer.
Step 3: I used a small rubber mallet to bump off the old top tree, and put the new one on (I bought mine from Lonerindustries). Reverse the steps to put the new one on remembering to put some new locktite on the torx screws.
Now you have unlimited options for bars including the WO560 drag bars that are now on my wife's 2008 Street Bob.
Step 2: Remove the two torx head screws from each side of top piece of your triple tree. Remove the screw securing the the brake line to the triple tree. Unscrew the large chrome cap that covers the center bolt on top of the tree. Remove 1 1/2" nut (this socket is not in most tool kits but the socket and 3/4 to 1/2" adapter can be had for less than $15) and washer.
Step 3: I used a small rubber mallet to bump off the old top tree, and put the new one on (I bought mine from Lonerindustries). Reverse the steps to put the new one on remembering to put some new locktite on the torx screws.
Now you have unlimited options for bars including the WO560 drag bars that are now on my wife's 2008 Street Bob.
#15
#16
Join Date: Feb 2008
Location: Mount Pearl, Newfoundland
Posts: 31
Likes: 0
Received 1 Like
on
1 Post
sent me a private message or email blairthistle@nl.rogers.com with your price for the risers. Thanks
#17
West Coast T-Bars recently posted a tirade on their Facebook page about Custom Chrome ripping off their Street Bob bars that bolt right up to the integrated riser.
Hearing about a company stealing ideas like that removes them from my list of companies I'll ever buy from...problem is most people never heard about their BS tactics.
I'd love to know where...I've been watching eBay for a few weeks, and my WTB post in the forum classifieds hasn't landed any leads either.
Hearing about a company stealing ideas like that removes them from my list of companies I'll ever buy from...problem is most people never heard about their BS tactics.
I'd love to know where...I've been watching eBay for a few weeks, and my WTB post in the forum classifieds hasn't landed any leads either.
#18
The guy at loner industries and I have been in contact about this thread and we have no problems between us.
Now, as for finding the top tree for $125, I don't know where you can find one at that price, I picked one up for $200 off a member here. I am saving it for when I have the money to black my front end out.
#19
I don't know anything about CC stealing part ideas from other companies. I just came across these when I was going through their online catalog and thought some people might be interested in them.
The guy at loner industries and I have been in contact about this thread and we have no problems between us.
Now, as for finding the top tree for $125, I don't know where you can find one at that price, I picked one up for $200 off a member here. I am saving it for when I have the money to black my front end out.
The guy at loner industries and I have been in contact about this thread and we have no problems between us.
Now, as for finding the top tree for $125, I don't know where you can find one at that price, I picked one up for $200 off a member here. I am saving it for when I have the money to black my front end out.
Loner makes a very nice top tree that I think is my best new option...still keeping an eye out for a FXD take-off.
http://lonerindustries.com/StreetBobTopTripleClamp.aspx
Thread
Thread Starter
Forum
Replies
Last Post