'13 Street Bob "License Plate Relocation Kit"
#12
The plate reloc for the 13's puts it on the rear fender I was told by the dealer.
Once he told me that I knew that would not be the route for me, and I didn't like the stock plate mount location either. So I just moved it myself.
https://www.hdforums.com/forum/dyna-...y-bux-190.html
about midway down the page (post 1897 & 1898) is how I moved my plate bracket, I need to take a better picture of how it looks in the end.
Once he told me that I knew that would not be the route for me, and I didn't like the stock plate mount location either. So I just moved it myself.
https://www.hdforums.com/forum/dyna-...y-bux-190.html
about midway down the page (post 1897 & 1898) is how I moved my plate bracket, I need to take a better picture of how it looks in the end.
#13
I just checked out your pictures on how you relocated your plate. I'm in the same boat, a 2013 street bob, and I couldn't find any pictures of the license plate relocation from HD and no one at the dealership had an answer for where it would relocate it to. I'm trying to install the detachable sissy bar, so I definitely need the license plate moved. I'm going to try out your method, it looks great.
/shrug, made me feel good about the reloc that they thought it looked good enough to be a HD kit. Not to mention it was under $50.00 to do and other than the initial design time sink was a quick diy.
Oh I should also mention the stock screws holding the lower belt guard onto the swing arm... you will need to replace the 2 where you attach the mounting bar at with longer bolts. I just took one out and went to lowes and got a longer self tapping than what was in it stock.
Last edited by Wykd; 12-12-2012 at 12:45 PM.
#14
Looks like I'll be going with powder coating the chrome rigid sideplates to black gloss then adding on the gloss black backrest and rack. According to the dealer, this won't require the license plate to be relocated. I'm curious why the quick detach sideplates do require moving the license plate however. It doesn't seem like there would be that much difference on how the sideplates are mounted.
#15
Looks like I'll be going with powder coating the chrome rigid sideplates to black gloss then adding on the gloss black backrest and rack. According to the dealer, this won't require the license plate to be relocated. I'm curious why the quick detach sideplates do require moving the license plate however. It doesn't seem like there would be that much difference on how the sideplates are mounted.
#17
#19
My version for my 13 Street Bob
https://plus.google.com/photos/10207...76007340414753
https://plus.google.com/photos/10207...76007340414753
Last edited by basswarrior; 04-15-2014 at 08:53 PM.
Thread
Thread Starter
Forum
Replies
Last Post