Hey all, going to be pulling off the rocker box covers to get them powder coated black. Has anybody done this job and run into any hang ups that I might want to know about? I have the service manual and it all looks pretty cut and dry, but I know there's always something that comes up on these jobs. Going to make sure the powder coater masks where the seal meets the gaskets so I don't end up with a leak. Had that happen to a friend when he had his rockers chrome plated. Thanks!

 

try the search feature

https://www.hdforums.com/forum/dyna-...na-how-to.html

 

its not hard, Joe from the powder pro does these all the time and has plenty of pics he can show you.

 

Remove the tank. remove the bolts. Make sure you know what bolts go where. Get new gaskets and reassemble. Super easy.

 

What year is your scoot? Some of the left bolts on the rear cylinder on 04/05 models are a real bitch to loosen/tighten; even with the tank removed.

 

buy one of these for when you take off and re torque the rocker bolts

 

we actually have an exchange program for rockers, can send you a set done and you just do the swap. send us back your stock ones as a core. here are some pics of ones we have done... we only charge $130 (+ core charge that is refunded when yours are received)

 

[QUOTE=JRK5892;10958452]we actually have an exchange program for rockers, can send you a set done and you just do the swap. send us back your stock ones as a core. here are some pics of ones we have done... we only charge $130 (+ core charge that is refunded when yours are received)

Hey Joe, is that for the uppers only, or the 4 piece set?

 

that is for all 4 (uppers and lowers) it is a package deal we do for HDF members. we have the rockers in stock ready to ship ($130 is coated in gloss, flat, wrinkle, or texture black)

 

i wish i could just ship my whole bike to you in a box