Finally some much due preventive maintenance!
#1
Finally some much due preventive maintenance!
I finally got off my *** and took care of that crappy IPB and stupid stator issue. Should be done by today. Here's a few pics. Not doing a write up on it. There's tons of threads discussing this issue. Just wanted to let every one know that I finally have a lil piece of mind when ripping up the streets of Nor Cal..
Here's the new baker IPB and the old crappy HD IPB
[IMG][/IMG]
And those famous bolts that are known to back out and break and make your life suck and wish you bought and 07. This is before the weld.
[IMG][/IMG]
Here's a photo of my bike on the lift. I have more photos but the wife wants to use the computer so I will post the rest later.
[IMG][/IMG]
Here's the new baker IPB and the old crappy HD IPB
[IMG][/IMG]
And those famous bolts that are known to back out and break and make your life suck and wish you bought and 07. This is before the weld.
[IMG][/IMG]
Here's a photo of my bike on the lift. I have more photos but the wife wants to use the computer so I will post the rest later.
[IMG][/IMG]
#4
#7
Trending Topics
#8
#10
Man am I jealous. I want to do mine so bad.. everytime I am on the bike I am thinking about those stupid little bolts. Everytime I hear a noise I think its my IPB.
Dealership wants $1800.00 to do the job and they won't install the Baker bearing but they will install a new inner primary with the locating pins.
I checked with an independant well respected local guy and he told me around $1500.00 with the new Baker bearing. Thats alot more than I have to spend on the bike.
I am sure I can do it myself but I don't have the tool to take out the IPB or press a new one in.
Dealership wants $1800.00 to do the job and they won't install the Baker bearing but they will install a new inner primary with the locating pins.
I checked with an independant well respected local guy and he told me around $1500.00 with the new Baker bearing. Thats alot more than I have to spend on the bike.
I am sure I can do it myself but I don't have the tool to take out the IPB or press a new one in.