Hello all. I now have Carlini T-bar 7.75 Rise and 7" pullback
I am looking to bring the bars a little closer to me maybe 3,4 " and 1" lower
I am having a hard time finding bars that match what I want .I do want t-bars again ..The carlini supersweeps are 2 " further back and 3/4 lower But not sure if that will be enough
Any sugestions
Thanks

 

How about the Wild 1 560 low profile drag bar, 4" rise and 14,5" pullback.

http://www.wild1inc.com/

 

I think they may be a bit to far back

 

I am not sure how far mone sit but i have the carlini clean sweeps and love them nice pullback but not to far. However you said that the pullback was not enough on the supersweeps so I believe those have more than mine do. Why do you want so much pullback? Although I just thought I have a different rake which would bring mine back further

 

Post a picture from the side with your current set of bars. Try to get the bike as upright as possible without risking tipping it over.
Then we'll have WG2011 do the same so we can compare. If the grips are further back than the gas cap (similar model) then we'll know who's has more pull back.

 

If you do swap, I am interested in your current bars...

 

[IMG][/IMG]

 

No other opinions

 

Go to http://www.wild1inc.com/ and look around. Narrow it down a bit and then call them. They are awesome to deal with. Be careful of going too low with pull back bars. They will hit your tank at full lock if they are too low...

 

Seams like I cant find what I am looking for they are either to tall Or to far back Grrr