2010 WG completed mods.... for now
#1
2010 WG completed mods.... for now
Well my front end mods are complete for now. I tackled the work myself. In fact this was my first time tearing down the front end of a motorcycles. And I enjoyed every minute. I took my time, read up on info here on this site, watched videos on youtube and wore out the factory manual.
All powder coating done by The Powder Pro. Thanks again Joe!
Bars 12" Chubby Outlawz
Risers 1.5" LA Chopper
Joker Machine front signals
HD Headlamp Ring part# 69735-05
HD Front axle nut cover part# 43428-09
HD Rear axle nut cover part# 43422-09
HD Polyurethane handlebar riser bushings part#56165-03
HD Diamond black hand grips part# 56405-08
Magnum Shielding Cables Black Pearl
Throttle, Idle, Clutch, and Brake all +6 over stock length.
All powder coating done by The Powder Pro. Thanks again Joe!
Bars 12" Chubby Outlawz
Risers 1.5" LA Chopper
Joker Machine front signals
HD Headlamp Ring part# 69735-05
HD Front axle nut cover part# 43428-09
HD Rear axle nut cover part# 43422-09
HD Polyurethane handlebar riser bushings part#56165-03
HD Diamond black hand grips part# 56405-08
Magnum Shielding Cables Black Pearl
Throttle, Idle, Clutch, and Brake all +6 over stock length.
Last edited by f3fidy; 04-28-2013 at 12:50 PM.
#2
#7