Call All Bassani Road Rage II Mega Power Experts
#1
Calling All Bassani Road Rage II Mega Power Experts
Howdy,
I have a question for all you Bassani experts out there. I have a 2006 Street Bob and I've finally decided on the Bassani Road Rage II Mega Power exhaust system in black. Part # 1D12RB. I've looked at every thread/image/video out there on the system. I can't get a good read on how the system will look on my scoot. Some pictures the muffler looks upswept and on others it looks parallel to the ground. Other pictures the pipes look parallel to the frame (ground clearance) near the cam cover while other pictures front pipe seem to bottom out below the frame. The chrome and black version look different. I realize different bike are shown but both are Dyna's.
Maybe I'm just dreaming here. Please slap me if I am.
Here is the black.
Here is the chrome.
Can you guys steer my in the right direction here? Which picture is accurate? Any help would be greatly appreciated. Worst case I can order from Dennis Kirk, bolt it on, and return for $ 7.00 if I'm not feeling it.
Thanks again,
TC
I have a question for all you Bassani experts out there. I have a 2006 Street Bob and I've finally decided on the Bassani Road Rage II Mega Power exhaust system in black. Part # 1D12RB. I've looked at every thread/image/video out there on the system. I can't get a good read on how the system will look on my scoot. Some pictures the muffler looks upswept and on others it looks parallel to the ground. Other pictures the pipes look parallel to the frame (ground clearance) near the cam cover while other pictures front pipe seem to bottom out below the frame. The chrome and black version look different. I realize different bike are shown but both are Dyna's.
Maybe I'm just dreaming here. Please slap me if I am.
Here is the black.
Here is the chrome.
Can you guys steer my in the right direction here? Which picture is accurate? Any help would be greatly appreciated. Worst case I can order from Dennis Kirk, bolt it on, and return for $ 7.00 if I'm not feeling it.
Thanks again,
TC
Last edited by TyFlyer21; 03-21-2014 at 11:43 AM.
#2
It probably fits like it does on my WG.
What do you want it to be like?
https://www.hdforums.com/forum/dyna-...-2-1-help.html
What do you want it to be like?
https://www.hdforums.com/forum/dyna-...-2-1-help.html
Last edited by Sling Blade 14; 03-21-2014 at 11:37 AM.
#3
#4
Might need to know about the rear shocks on the pics to be sure. I would think a bike with 13 1/2" shocks would make the pipes look more upswept, while the opposite for slammed shocks. The mounting to the motor and transmission should be identical for all the 96" and 103" motors, I believe....
#5
Might need to know about the rear shocks on the pics to be sure. I would think a bike with 13 1/2" shocks would make the pipes look more upswept, while the opposite for slammed shocks. The mounting to the motor and transmission should be identical for all the 96" and 103" motors, I believe....
#6
Yes, but with taller shocks the swing arm will be angled down more because the top of the rear shock is elevating the back of the frame(and thus the back of the engine/transmission) so I think the appearance of the pipes will change quite a bit.
#7
I appreciate the help!
Trending Topics
#8
Thread
Thread Starter
Forum
Replies
Last Post
ltcurt33
Dyna Glide Models
28
06-19-2011 11:25 PM
RF99Dyna
Dyna Glide Models
46
07-30-2010 05:18 PM