Can someone tell me, or direct me to the proper information, for step by step instructions, along with all parts needed to complete the task of switching from mid controls to forward controls on a Dyna model?, thanks in advance for any help.

 

Google is your friend.

https://www.harley-davidson.com/en_U...ts/-J03509.pdf

 

Here is the link to the Harley instructions and parts list: http://www.harley-davidson.com/en_US...ts/-J03509.pdf

The HD kit is a little pricey, but so is everything else they sell.

 

thanks so much.

 

Im doing the opposite. Im going from forwards to mids. let me know if you'd wanna trade some parts. trading keeps it cheap

 

i have the kury akyn forwards and im about ready to put my mid pegs back on, this way i have somewhere else to move the foot to

 

i have a 2013 street bob that the original owner converted to forwards and i wanna convert it back to mids. What parts would i need ????

 

I just did forwards on my LR, I have to say it was a PITA to cut the shifter bar or whatever it's called but after about two hours with a hacksaw blade it was finally cut and done. Everything else is a piece of cake. Make sure to grab some blue locktite and you're good. And I did the HD kit. It came with everything needed.

 

Cant do it! Take her to a dealer.

 

toeknee610, I will let you know, A friend has his eye on a FXDL, if the deal goes through, I know he wants to change out the mid controls right away.