Dyna Glide Models Super Glide, Super Glide Sport, Super Glide Custom, Dyna Glide Convertible, Super Glide T-Sport, Dyna Glide Police, Dyna Switchback, Low Rider, Street Bob, Fat Bob and Wide Glide.
Sponsored by:
Sponsored by:

Floorboards for older dynas?

  #1  
Old 06-24-2014, 08:00 PM
br549A1's Avatar
br549A1
br549A1 is offline
Outstanding HDF Member
Thread Starter
Join Date: Nov 2013
Posts: 2,358
Likes: 0
Received 34 Likes on 33 Posts
Default Floorboards for older dynas?

Anyone know about putting floorboards on an older dyna, 1998? I have the kuryakyn forwards but thinking about selling them and getting floor boards. I looked around and didn't see any. Maybe I'm missing it. Thanks
 
  #2  
Old 06-24-2014, 08:20 PM
Two Feathers's Avatar
Two Feathers
Two Feathers is offline
Tourer
Join Date: Apr 2008
Location: Las Vegas
Posts: 264
Likes: 0
Received 0 Likes on 0 Posts
Default

J&p cycles, they're called tour master I think.
I have them on my 03 lowrider, they bolt right on, $50.00 per set if I remember right
 
  #3  
Old 06-24-2014, 08:28 PM
br549A1's Avatar
br549A1
br549A1 is offline
Outstanding HDF Member
Thread Starter
Join Date: Nov 2013
Posts: 2,358
Likes: 0
Received 34 Likes on 33 Posts
Default

Originally Posted by Two Feathers
J&p cycles, they're called tour master I think. I have them on my 03 lowrider, they bolt right on, $50.00 per set if I remember right
.

Thanks. Did you put them where the forwards go or where the mids go?
 
  #4  
Old 06-25-2014, 07:21 AM
br549A1's Avatar
br549A1
br549A1 is offline
Outstanding HDF Member
Thread Starter
Join Date: Nov 2013
Posts: 2,358
Likes: 0
Received 34 Likes on 33 Posts
Default

This is what I want to do, put them between the mids and forwards or have them more forward than back. These are two that were done custom, is there anyone selling a kit?
 
Attached Thumbnails Floorboards for older dynas?-image-3822302430.jpg  
  #5  
Old 06-25-2014, 01:06 PM
Two Feathers's Avatar
Two Feathers
Two Feathers is offline
Tourer
Join Date: Apr 2008
Location: Las Vegas
Posts: 264
Likes: 0
Received 0 Likes on 0 Posts
Default

My bolt to the stock mid mount
 
  #6  
Old 06-26-2014, 04:14 PM
Galaxie500fb's Avatar
Galaxie500fb
Galaxie500fb is offline
Advanced
Join Date: Jun 2014
Location: Massachusetts
Posts: 70
Likes: 0
Received 0 Likes on 0 Posts
Default floorboards on my 1997 dyna fxd

I have a set of factory floorboards that i had on my 1997 fxd. I took them off right before trading in the bike. It was in a box of parts that i purchased via a craigslist ad. I did have to acquire one of the board mounting brackets but i easily found one from a harley dealer that offers online ordering. They will not fit my current bike which is the new 2014 fxdl. I`m looking to trade them for a set of forward controls that will fit my bike. I`d also sell them outright for the right offer. It`s complete minus the linkage rod that goes to the shifter handle attached to the transmission. I had it installed with the arm off my old forward controls. It`s all there... the boards, the brake rod , brake pedal with a new pedal pad plus the adjustable heel toe shifter. Pics if your interested. I say factory because it was standard equipment on the dyna defender.
 

Last edited by Galaxie500fb; 06-26-2014 at 04:16 PM. Reason: more info
  #7  
Old 06-26-2014, 05:13 PM
TUCCI's Avatar
TUCCI
TUCCI is offline
Extreme HDF Member
Join Date: Jun 2011
Location: Glendale AZ
Posts: 10,216
Received 218 Likes on 167 Posts
Default

We had forward controls and floorboards installed before taking delivery of my wife's anniversary FXDC and the boards were original HD. After you've had boards its practically impossible to go back to pegs. I couldn't tell you the part # but I bet the parts dude could.
 
  #8  
Old 06-26-2014, 05:32 PM
br549A1's Avatar
br549A1
br549A1 is offline
Outstanding HDF Member
Thread Starter
Join Date: Nov 2013
Posts: 2,358
Likes: 0
Received 34 Likes on 33 Posts
Default

Originally Posted by Galaxie500fb
I have a set of factory floorboards that i had on my 1997 fxd. I took them off right before trading in the bike. It was in a box of parts that i purchased via a craigslist ad. I did have to acquire one of the board mounting brackets but i easily found one from a harley dealer that offers online ordering. They will not fit my current bike which is the new 2014 fxdl. I`m looking to trade them for a set of forward controls that will fit my bike. I`d also sell them outright for the right offer. It`s complete minus the linkage rod that goes to the shifter handle attached to the transmission. I had it installed with the arm off my old forward controls. It`s all there... the boards, the brake rod , brake pedal with a new pedal pad plus the adjustable heel toe shifter. Pics if your interested. I say factory because it was standard equipment on the dyna defender.
How much do you want? Any pictures of how they looked? Want to see the foot positioning.
 
  #9  
Old 06-26-2014, 06:29 PM
Galaxie500fb's Avatar
Galaxie500fb
Galaxie500fb is offline
Advanced
Join Date: Jun 2014
Location: Massachusetts
Posts: 70
Likes: 0
Received 0 Likes on 0 Posts
Default

I`m having trouble adding pics to this thread but i have added them to my album which i hope is viewable from my member profile.
 
  #10  
Old 06-26-2014, 06:42 PM
br549A1's Avatar
br549A1
br549A1 is offline
Outstanding HDF Member
Thread Starter
Join Date: Nov 2013
Posts: 2,358
Likes: 0
Received 34 Likes on 33 Posts
Default

Nope can't see them. Price? Are you in the eastern or western part of the state?
 

Thread Tools
Search this Thread
Quick Reply: Floorboards for older dynas?



All times are GMT -5. The time now is 06:46 PM.