Throttle By Wire Plug Diagram
#1
Throttle By Wire Plug Diagram
Does anyone have a wiring diagram for the TBW connector in the bars?
I am working on internal wiring and new bars, stupid me tried to pull the connector through the bars and needless to say it broke off in the bars. Now I have got all that extra stuff out of the bars (the broke conector) I need to solder my wires togehter before my next attempt. The throttle itself has a red, white and black wire on each side of the connector, the other pigtail ( leading to the fairing) has six other wires of different colors.
I need to know which wires to solder together.
Wrecks SUCK!
sometimes fixing it back like it was seems a whole lot easier, but not near as cool!!!
Thanks,
ms_weasel
I am working on internal wiring and new bars, stupid me tried to pull the connector through the bars and needless to say it broke off in the bars. Now I have got all that extra stuff out of the bars (the broke conector) I need to solder my wires togehter before my next attempt. The throttle itself has a red, white and black wire on each side of the connector, the other pigtail ( leading to the fairing) has six other wires of different colors.
I need to know which wires to solder together.
Wrecks SUCK!
sometimes fixing it back like it was seems a whole lot easier, but not near as cool!!!
Thanks,
ms_weasel
#2
#3
#4
The following users liked this post:
Teddyboy (03-07-2020)
#6
#7
A lot of people have cut the TBW and spliced new extensions. Someone sells an extension kit to do so. I didnt do it on mine, but I did wrap the connector with electrical tape so it would not come apart. I think if I were having to extend the wires, I would just buy the SE TBW replacement.
Thread
Thread Starter
Forum
Replies
Last Post