You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join HDForums.com community today!
Sent the bike to Custom shop to have PC and a A.N Intake installed. After installation I hit the road (friday) Noticed a knock/ping like sound when while cruising, I roll on the throttle hard. Almost sounds like a screw driver hitting a thin metal plate or something opening and closing. Also noticed it while at idle, snorting the throttle as well. The bike also now has a hesitation around the 10-15% TP at around the 1500-2500 RPM range. Im unsure what map the custom shop installed. I did look over the maps on the PC website, and I cannot find any with my setup. So, I went with what was closest to mine which was SE slip on's and SE intake.
Ive sense emailed fuel motto, and Im awaiting a map from them, but wanted to ask some of you for your thoughts, and see if I can get going in the right directions so i can ride worry free.. The sound it makes and the slight hesitation is more of a annoyance because i cannot put my finger on the issue, and it was not there prior to the install.. Any help would be great, especially if you guys have or know of a map I can download that is for my particular setup.
Thanks
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on HD Forums!
PCIII Map Question 07 Street Bob
