change valve springs?
#1
change valve springs?
85,000 miles and time for a top end and cams.
Cams are Woods 777
Heads are later model 103 zero mile take offs with the stock beehive springs
Road King
Are the new stock beehive style springs fine with this cam, or should they be changed to suit the cam.
If so then stock, SE, or something else
Cams are Woods 777
Heads are later model 103 zero mile take offs with the stock beehive springs
Road King
Are the new stock beehive style springs fine with this cam, or should they be changed to suit the cam.
If so then stock, SE, or something else
Last edited by 65Tiger; 01-10-2017 at 10:08 PM.
#3
85,000 miles and time for a top end and cams.
Cams are Woods 777
Heads are later model 103 zero mile take offs with the stock beehive springs
Road King
Are the new stock beehive style springs fine with this cam, or should they be changed to suit the cam.
If so then stock, SE, or something else
Cams are Woods 777
Heads are later model 103 zero mile take offs with the stock beehive springs
Road King
Are the new stock beehive style springs fine with this cam, or should they be changed to suit the cam.
If so then stock, SE, or something else
Scott
__________________
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
#4
Thread
Thread Starter
Forum
Replies
Last Post
Plated & Screwed
Engine Mechanical Topics
5
01-29-2017 12:53 PM
15 flhx
Engine Mechanical Topics
63
03-28-2016 11:20 AM
swampking
Engine Mechanical Topics
10
04-17-2014 11:41 AM