Road Glide motor build
#1
Road Glide motor build
Well it started this weekend. The 96in, with 10,000 miles, has been tore down to make room for the S&S 106 kit. The last of the chrome was dropped off at the powdercoater. Unfortunately, funds are not available for head work at this time.
Details:
S&S 106 kit
S&S Lifters, Quickie push rods
Cycle-Rama 575 cams
FuelMoto 2-1-2 head pipe with full size crossover
Cometic gaskets, .030 head gasket
Here are some pictures. Hopefully it will be back together in a week or so and then off to the tuner.
Details:
S&S 106 kit
S&S Lifters, Quickie push rods
Cycle-Rama 575 cams
FuelMoto 2-1-2 head pipe with full size crossover
Cometic gaskets, .030 head gasket
Here are some pictures. Hopefully it will be back together in a week or so and then off to the tuner.
#2
Should run well.
Headwork will ace it later.
Scott
Headwork will ace it later.
Scott
__________________
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
Thread
Thread Starter
Forum
Replies
Last Post