Engine Mechanical Topics Discussion for motor builds, cams, head work, stripped bolts and other engine related issues. The good and the bad. If it goes round and around or up and down, post it here.

Engine Light

Thread Tools
 
Search this Thread
 
  #1  
Old 01-07-2023, 07:19 PM
peteperrone's Avatar
peteperrone
peteperrone is offline
Tourer
Thread Starter
Join Date: Mar 2013
Location: Lake Panasoffkee, FL
Posts: 416
Received 47 Likes on 23 Posts
Default Engine Light

Hello,
So the other day I rode a couple of miles to get gas to go for a dinner ride. After filling up and on the way home my engine light came on!
What would be the first few things to check before taking it to the shop?
Thanks!
 
  #2  
Old 01-07-2023, 07:20 PM
kel03's Avatar
kel03
kel03 is offline
Seasoned HDF Member
Join Date: Dec 2009
Location: Niagara, Ontario, Canada
Posts: 17,689
Received 6,044 Likes on 4,356 Posts
Default

See if it's thrown any codes.
 
  #3  
Old 01-07-2023, 07:22 PM
peteperrone's Avatar
peteperrone
peteperrone is offline
Tourer
Thread Starter
Join Date: Mar 2013
Location: Lake Panasoffkee, FL
Posts: 416
Received 47 Likes on 23 Posts
Default

Originally Posted by kel03
See if it's thrown any codes.
How do I do that?
 
  #4  
Old 01-07-2023, 07:22 PM
kel03's Avatar
kel03
kel03 is offline
Seasoned HDF Member
Join Date: Dec 2009
Location: Niagara, Ontario, Canada
Posts: 17,689
Received 6,044 Likes on 4,356 Posts
  #5  
Old 01-07-2023, 07:42 PM
peteperrone's Avatar
peteperrone
peteperrone is offline
Tourer
Thread Starter
Join Date: Mar 2013
Location: Lake Panasoffkee, FL
Posts: 416
Received 47 Likes on 23 Posts
Default

Originally Posted by kel03
Thank You‼️
 
  #6  
Old 01-08-2023, 08:49 AM
peteperrone's Avatar
peteperrone
peteperrone is offline
Tourer
Thread Starter
Join Date: Mar 2013
Location: Lake Panasoffkee, FL
Posts: 416
Received 47 Likes on 23 Posts
Default

So after checking codes here is what came up:
ECM
P0522
P0523
PN 001349-01

SPDO
B1213
PN 709001218

Other things that came up:
PN 41000341C
PN 40800131
PN 76000076C

i check the part numbers on H-D and could not find any of them.

Any suggestions would be greatly appreciated!
 
  #7  
Old 01-08-2023, 08:56 AM
Screamin beagle's Avatar
Screamin beagle
Screamin beagle is offline
Seasoned HDF Member
Join Date: Jun 2017
Location: Granville New York
Posts: 5,077
Received 4,006 Likes on 1,999 Posts
Default

P0522 and 23 must be a typo...don't see them on the code list. What year, model, mileage and mods? Does it run any differently since the codes came on? Go recheck them and make sure you have them right then I would ride it, as long as its running like normal, and see if the codes come back.
 
  #8  
Old 01-08-2023, 09:51 AM
peteperrone's Avatar
peteperrone
peteperrone is offline
Tourer
Thread Starter
Join Date: Mar 2013
Location: Lake Panasoffkee, FL
Posts: 416
Received 47 Likes on 23 Posts
Default

Originally Posted by Screamin beagle
P0522 and 23 must be a typo...don't see them on the code list. What year, model, mileage and mods? Does it run any differently since the codes came on? Go recheck them and make sure you have them right then I would ride it, as long as its running like normal, and see if the codes come back.
2018 street glide special
does not run different
have had problems with oil light on once in a while. Stop for 5-10 minutes then it’s off
here is what I found:




 
  #9  
Old 01-09-2023, 12:54 PM
peteperrone's Avatar
peteperrone
peteperrone is offline
Tourer
Thread Starter
Join Date: Mar 2013
Location: Lake Panasoffkee, FL
Posts: 416
Received 47 Likes on 23 Posts
Default

Originally Posted by Screamin beagle
P0522 and 23 must be a typo...don't see them on the code list. What year, model, mileage and mods? Does it run any differently since the codes came on? Go recheck them and make sure you have them right then I would ride it, as long as its running like normal, and see if the codes come back.
So, I have checked again, same codes.
An earlier post I asked about my oil pressure light. https://www.hdforums.com/forum/engin...oil-light.html
Someone suggested the connections. I was thinking of changing out the pressure switch since it seems to be a problem.
 
  #10  
Old 02-06-2023, 09:30 PM
peteperrone's Avatar
peteperrone
peteperrone is offline
Tourer
Thread Starter
Join Date: Mar 2013
Location: Lake Panasoffkee, FL
Posts: 416
Received 47 Likes on 23 Posts
Default

Thanks everyone! Took it to H-D, all checked out no problems.
 



All times are GMT -5. The time now is 07:06 AM.