Hillside Cycle 107" build
#13
After taking it easy for the first 150 miles or so on my 2013 Softail Slim I've been riding the way I like to ride for about 200 miles and I gotta say I'm happy with the build Scott and his crew did. I told him I wanted a low to mid range torque motor and I left it up to him to build my engine. I do a lot of riding on the back roads where I live and this engine build suits my style of riding. Had Joe's Cycle do the dynotune and she runs strong and pulls good. I'd recommend Hillside Cycle to anyone looking for a first class,knowledgeable and honest engine builder.
107"
Stage 2 heads
Woods TW6-6 cams
107"
Stage 2 heads
Woods TW6-6 cams
But yea post up that dyno sheet!
#14
Scott,
As a matter of fact I got into it quite a bit yesterday and all I can say is WOW! It's crazy fast.Let her rip 1st thru 4th gear to about 4800rpm and things get real blurry real fast and there's still some left.It's hard to read the tach when your eyes are watery so I might ditch the glasses for goggles.LOL. Scott, thanks again. Anyone who wants to go fast and have some fun call Scott@ Hillside Cycle you will not regret it. Scott call me or pm me when you get a chance.
As a matter of fact I got into it quite a bit yesterday and all I can say is WOW! It's crazy fast.Let her rip 1st thru 4th gear to about 4800rpm and things get real blurry real fast and there's still some left.It's hard to read the tach when your eyes are watery so I might ditch the glasses for goggles.LOL. Scott, thanks again. Anyone who wants to go fast and have some fun call Scott@ Hillside Cycle you will not regret it. Scott call me or pm me when you get a chance.
I'll give you a holler tommorrow.
Scott
__________________
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
#15
Thread
Thread Starter
Forum
Replies
Last Post
allthefineprint@gmail.com
Engine Mechanical Topics
3
09-17-2018 06:19 AM