SE 255 VS Woods TW222
#1
SE 255 VS Woods TW222
Hi everybody. Having trouble deciding on what cams to put a stock 2010 Electra Glide 96 cu in. I've read and read so much on cams I'm spinning now. I would like to hear from riders that have had either of these cams and their opinion. I have the air cleaner and run 4" Rhinehart slip ons. I have a Power Vision tuner to set everything up once it's put together. Not looking for a drag bike, way to big for that. Just a little more low and mid range power. 2 up riding 99% of time. I've read that the SE 255's run flat at higher rpms and the TW222 run higher rpms. I've never really paid attention to the rpms but I don't ever remember hitting the rev limiter.
Ride Safe Thanks
Ride Safe Thanks
#3
#4
Hi everybody. Having trouble deciding on what cams to put a stock 2010 Electra Glide 96 cu in. I've read and read so much on cams I'm spinning now. I would like to hear from riders that have had either of these cams and their opinion. I have the air cleaner and run 4" Rhinehart slip ons. I have a Power Vision tuner to set everything up once it's put together. Not looking for a drag bike, way to big for that. Just a little more low and mid range power. 2 up riding 99% of time. I've read that the SE 255's run flat at higher rpms and the TW222 run higher rpms. I've never really paid attention to the rpms but I don't ever remember hitting the rev limiter.
Ride Safe Thanks
Ride Safe Thanks
Either the Wood 222 or an Andrews 48 will turn that 96" up nicely.
Scott
__________________
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
#7
Thread
Thread Starter
Forum
Replies
Last Post