shift linkage interference/samson cholo ex
#1
shift linkage interference/samson cholo ex
im assembling my build and noticing a problem and hoping someone else has encountered it.
Mounting up the rear cylinder curved pipe for the Samson cholo exhaust, my linkage at the rear shifter arm is at about the center of the exhaust. I assume the ss 113 motor ex port is slightly different than the stock evo, and this is causing the problem.
Looking at the Samson page, they sell an offset **** linkage, without much description.
Is this a common problem or common occurrence running the true dual cholos in softails with the bigger motors?
Thx, Kevin.
Mounting up the rear cylinder curved pipe for the Samson cholo exhaust, my linkage at the rear shifter arm is at about the center of the exhaust. I assume the ss 113 motor ex port is slightly different than the stock evo, and this is causing the problem.
Looking at the Samson page, they sell an offset **** linkage, without much description.
Is this a common problem or common occurrence running the true dual cholos in softails with the bigger motors?
Thx, Kevin.
#2
Join Date: Jan 2011
Location: Haslet Texas
Posts: 20,999
Likes: 0
Received 4,317 Likes
on
1,946 Posts
#4
Join Date: Jan 2011
Location: Haslet Texas
Posts: 20,999
Likes: 0
Received 4,317 Likes
on
1,946 Posts
Whoever had the pipes before had to have one to run them.
I would call whoever you bought the pipes from and see if they still have it.
#6
Join Date: Jan 2011
Location: Haslet Texas
Posts: 20,999
Likes: 0
Received 4,317 Likes
on
1,946 Posts
Thread
Thread Starter
Forum
Replies
Last Post