If anybody here has upgraded their front suspension and eliminated the air lines, I would like to purchase one of the fittings that is molded to the banjo bolt and the air line plugs into. Its for a 1998 FLHT. Item # 6 in the diagram.

 

5/32 push type tee air line fittings.

http://www.summitracing.com/parts/vpe-2675/overview/

The harley banjo fitting has a 7/16 fine thread banjo bolt. I haven't seen any after market fittings that size.

 

This is the part I am looking for on the left.

 

I broke one and got the replacement from the dealer.


.......... and, Welcome Home

RVN '71-'72
196th LIB

 

I went to the dealer and the individual part has been discontinued. You have to buy the entire front air system for $90. There is a listing on e-bay from a bone yard, but when I looked at the blown up photo, they look like they may be off of a bike that was on fire. I will just keep checking e-bay. Thanks for the reply!




Welcome home to you also!

 

You may have to adapt one of these.

http://www.ebay.com/itm/Push-In-To-C...3D311162014027

This has a British pipe thread.

This has a 1/4" pipe fitting.

 

AJ, Thanks to your info I was able to find the real world, non-Harley name for this part. I have found several sources for Push In To Connect Male Banjo Elbow Fittings.

 

Cool. The pipe thread could be remachined and threaded to 7/16-20.



Nam vet 630th MP CO

 

......... and a Welcome Home to you too!

 

You still looking?
I may have one.
PM me if you are.